Montech AIR 1000 Lite Black ATX Mid Tower Case/ 3 x 120mm High Airflow Fans Pre-Installed/Swivel Glass Side Panel/Mesh Front Panel/Upgrade Space for High-end GPU and Motherboard

This case is sharp. I love it. Room enough for everything I need and no tacky led fans to swap out. This thing is well engineered and we'll mapped out. I love it.The ONLY suggestion I have is: make the little opening in the floor up front a little larger. It just misses being large enough to hang my 360 with the tubes down. Metal shears might help DIYers fix it, but I'm not willing to risk it.I love this case.

Very nice design. Built a new pc and transferred my old one out to the garage. Transferred old parts to this case as I needed a smaller case with more breathability and vented covers. This checked off all the boxes. Price was more than reasonable.

I was looking for a nice MATX case and settled with this one. Looks really neat with plenty of airflow. I managed to fit a 240 radiator at the top, it was a tight fit. Even though I do have some pretty slim low profile ram sticks. They included plenty of screws to secure everything in place. Only complaint I have is the wire space in the back. Once everything was attached and I tried to secure back plate, it now sticks out slightly. Tried to move wires around but it still stuck out. Not very noticeable, especially how I have it set up on my desk. Just a lil annoying. But overall, i am very very satisfied with this case.

I absolutely love this case and there is a reason why it is sold out. My only real gripe is the PCIE punchout slots. I wish these were replaceable, but with a lack of options in PCIE cards on an MATX motherboard, it isn't that big of a deal.Building in this case is a breeze and there are a ton of cable management options in it and plenty of room in the back. Not much room for many 3.5" hard drives, but I have largely gone to NVME drives or SATA SSDs, so not a big deal for me.Fantastic case option. Hopefully it is back in stock soon!

I really like this case, and it is a great choice for budget builds. Super compatible with other parts, and larger GPU. A lot of space for case fans as well!

Case is awesome

Had to retrieve it from the leasing office guys had put the bldg. number as my apartment number but the product is good. 5 stars otherwise.

Was shopping around for a case to move my older setup. The few things i was looking for was M-atx size and 280mm rad support. On the product page it state that a 280mm rad can fit in the front, it absolutely cannot.Pros: relatively "Inexpensive", tempered glass side panel, power supply shroud, adequate space for wire management.Cons: There are so many issues with this case.-Tempered glass door is held with very weak magnets, would worry if moving the case around-Front mesh panel will fall off when moving the case, again very weak magnets-THE CASE DOES NOT SUPPORT A 280mm RADIATOR. I have tried every which way to get it to fit, it simply does not fit in the front of the case. There is a metal bar that protects the front/top panel IO that blocks a 280mm from being installed on the front panel, the mount spacing to attached the radiator or fans does not allow for it to be installed.-comes with a mesh, pretty useless in the sense that there is no where to put the mesh.-the HDD cages makes it pretty difficult to attach the sata power

looks really slick ! solid case for the price, decent cable management, couldn't fault it except for one thing!spend all weekend moving my pc from my main case to this and when I went to put the PSU in the cutouts wouldn't' allow my beefy ATX psu to fit so I had to spend the rest of the day transferring everything back!I ended up putting my nephews pc into this case instead, his smaller psu fit fine.frustrating!

I rarely leave reviews but after installing my old parts into this new PC case I felt compelled. Compared to my previous and other cases I've built in this was an absolute dream. I got the Lite 100 in white and its so much case for the money. It came with 1 exhaust and 3 case fans. I installed an extra two fans and with so much metal mesh on the front and topside my temperatures have come down by roughly 10-15*C from the hellish hot box I had before. The red light in the photo is a SATA powered fan controller which I'd recommend, the one I got was about £6 on amazon. Whilst browsing or doing light work I only have the exhaust and CPU fans on. It's absolutely silent in this configuration. My mouse clicks and keyboard typing is louder which surprised me considering how many open holes this thing has. When I'm gaming or doing video editing I turn the fans onto the lowest setting which is fairly quiet keeps both the CPU and GPU at about 60*C with the gpu sometimes pushing 70 on a sustained load at an ambient room temp of 20*C.It's not often you get a PSU shroud in such a cheap case as well as an easily removed hinge glass panel and a back cable compartment with cables that look like it was assembled by someone with OCD.Thoroughly impressed by this case and it's currently up for £41 - I'd love to know how you can manufacture something like this and still make profit on that but sadly I'm not an accountant. Comes with a magnetic filter for the top fans, I'd recommend having that on the outside of the case rather than the suggested inside.

Great case for the price looks amazing and has good airflow.The case cane with 3 fans on the right side as intake and one of the rear as exhaust. All fans where 3pin (no molex).Other positive is when u open the back of the case there is cable straps and zip ties for cable magment. The front panel cables where already cable managed when I opened the case.Don't forget this case only fits a motherboard which is a mini-atx or ITX. This mean no ATX motherboard will fitOverall good case 8/10 best choice if your not looking to spend up allot of money of a case