Rain-X Latitude Water Repellency 14" 2-in-1 Windshield Wiper Blade

Description

Rain-X Latitude Water Repellency 2-in-1 wiper blades provide an innovative solution to both clear and repel the elements for ultimate driving visibility. These wipers also treat your windshield with a water repelling coating so water magically beads up and rolls away while you drive. Rain-X Latitude Water Repellency 2-in-1 Windshield Wiper Blade 14" Product Features: Water Repelling Coating – Rain‑X water repelling coating is applied to the windshield by the wiper blades and lasts for months. Easy Installation – New and improved pre-installed universal adapter installs in minutes and fits 96% of all vehicles on the road. Advanced, Beam Style Technology – The blade contours to the curvature of the windshield for a smooth, virtually streak-free wipe. All-Weather Performance – The synthetic blend rubber squeegee can withstand extreme weather conditions for enhanced durability. Reduced Noise Wind Lift – An aerodynamic spoiler prevents wind lift and delivers a quiet wipe. Have You Changed Your Wiper Blades Lately Wiper blades should be replaced every six months to a year or as soon as you notice a difference in driving visibility. When wiper blades no longer make proper contact with the windshield surface, they can begin to squeak, chatter, skip, smear or streak reducing driving visibility. Wiper blades deteriorate due to many environmental factors including:  Sun: Ultraviolet light and ozone deterioration Oil: Car waxes and exhaust hold rubber-deteriorating oil Airborne debris: Sand, mud and dust carried in the wind Moisture: Acid rain and salt water (in moist air both near the shore and inland) Common Wiper Problems Streaking: occurs when the rubber squeegee dries, hardens and cracks. It can also be caused by tree sap, road tar and other foreign substances collected on either the glass or the blade. Skipping: occurs when the blade develops a curvature from lack of use (e.g. left in the ‘parked position’ for an extended length of time). Wearing: occurs with extensive use and is when the rubber edges are rounded instead of squared. Splitting: is caused when the sun’s ultraviolet rays penetrate the rubber squeegee, causing it to breakdown and separate from the frame. Bent Refill Vertebra and Bent Frames: cause inconsistent contact with the glass surface, creating streaking or skipping. Avoid these common problems and extend the life of your wiper blades by following these simple steps: Clean your windshield every time you fill your gas tank. Gently wipe the rubber squeegee with a damp paper towel to remove any loose dirt or oil. Never use your windshield wipers to de-ice your windshield. Instead, either use an ice scraper or use your defroster to melt snow and ice. Pull your wiper blades away from the windshield during winter months to prevent ice build up on the rubber squeegee and to prevent them from sticking to the windshield. Efficient wiper blades are as important to a vehicle’s safe operation as clean oil and good tires. So remember to change your wiper blades at least once a year, to inspect them frequently for wear and tear and to enjoy the view.