🚽 Upgrade Your Flush, Save the Planet!
The Fluidmaster Replacement Adjustable Flapper 502 is designed for maximum performance and water savings. With its chlorine and hard water resistance, this durable flapper ensures reliability while being incredibly easy to install. Weighing just 50g, it’s the perfect eco-friendly choice for any modern bathroom.
Manufacturer | Fluidmaster |
Part Number | 502 |
Package Dimensions | 18.9 x 10.8 x 5.9 cm; 50 g |
Manufacturer reference | 502 |
Batteries included? | No |
Batteries Required? | No |
Item Weight | 50 g |
S**N
Saved me paying a plumber
Good replacement and easy to fit myself
I**N
Toilet flapper
Practically perfect in every way .
C**H
These do not last forever
Due of the chlorine used to disinfect or water supply the flexible plastic becomes harder over time and actually shrinks, which means after about 3 to 4 years the flapper no longer seals properly. Normally water trickles past the flapper and down into the toilet bowl, or the flush never stops flushing. I have replace three of these over a period of about 12 years while the rest of the Fluidmaster stuff ( float valve, flush handle and the actual flapper seat have been fine ). I normally know our flapper needs replacing when I hear water flowing in out water system at odd times, this happens because when the flapper first starts to leak it is very slow leak, and the water level in the cistern drops very slowly until it triggers the float valve ( ballcock ) to replace the water, so you get a short whoosh of water through the house pipes - sometimes in middle of night when no water should be flowing, but the water soon shuts off. These flappers are so easy to fit it only takes a few minutes to unclip the faulty one and clip in a new one, reconnect the chain to flush lever and you are good to go. I normally keep a spare one in a safe place, which is OK because unless the flapper is immersed in chlorinated water the plastic stays lovely an flexible for a very long time. I had just fitted my spare flapper so ordered another one straight away.
M**.
Water.
Fits.
K**E
Does the job
As described
M**S
fitted perfectly.
so easy to install ,cheap enough not sure how long the original had been installed 5 yrs maybe.
M**N
My thick flapper pivots needed sanding to smaller diameter to work
Hard to fit. The new hinge slots too SMALL for my old unit. It can be pushed onto my large pivots but then there is too much friction too allow the flapper to FALL . Lots of water lost. So I sanded of some of the outer diameter of those old LARGE pivots using strips of wet and dry and then all worked well. The supplied extra small pivot unit was no good at all, too small to fit even if I cut of the old pivots so ignore that clamping unit.
O**G
Perfect
Nothing lasts forever and this replaced my worn out one, so spot on.
Trustpilot
1 month ago
2 months ago