JENOLITE Non-Hazardous Rust Remover | 1 Litres | Water Based | Rust Remover For Metal: Iron, Steel, Chrome & Aluminium | Ideal For Fuel Tanks | Environmentally Friendly, Non-Toxic Rust Remover

The amount of time I have spent trying to derust things over the years. I'm kicking myself for not trying this earlier.Wire brushes, wire wool, wet and dry, scouring pads and elbow grease. I've used the Jenolite original rust remover, but that is highly corrosive, damaging to paint, and to users if you're not careful. I stopped because of the safety aspect. I had a bunch of fiddly small pieces I wanted to rescue, but was running short of the patience to do it the hard way. So finally put my hand in my pocket and got some of this stuff.You can see from the pictures that it's a collection of drill bits and screwdriver bits that got caught out in the rain without being dried off quickly enough, and some bicycle bits that had suffered. Due to long shifts I just just left them to soak for nearly 3 days. Nothing on the pack said I shouldn't, and it hasn't harmed anything. the paint on the bike skewer is fine.Anyway, the result was the 3rd picture. The rust is all gone. The carbon tool steel has darkened a little, but that may be due to an extended soak. The bright steel is still bright. They just needed to be dried with some kitchen towel, and if not quite good as new, certainly a lot better than when they started. All for about 15-20 minutes work from me, most of that was drying them off.It wont work forever, but is reusable. Whatever the active ingredient is, it's used up reacting with the rust. I bought a litre, as I only do small bits no and again. This should last a while and makes a tedious task near effortless. I can see restoring cheap or free tools in my future.

Brilliant product. I left the rusty items for 48hrs perfect with a bit of cleaning

Bottle came in a resealable bag and there were drops inside the bag. When opening the bottle you can see why it had leaked, there is no seal on the bottle. The manufacturer should consider adding a removable seal to avoid this leaking. Thankfully it was a few drops so didn't really lose much product but still, things like these need to be sealed.I used this to get rid of bike chain rust. It does take 2 - 3 hours to do it's job.I poured this over the bike chain (since I don't want to take my bike apart and not be able to put it back together again properly), also drenched a standard yellow wiping cloth in this and then placed the clothed over the bike chain and cogs. Left it for a 2 -3 hours and came back to check.It had done a good job, but it would be nice if it got to work quicker. I did also use a metal wire brush to help remove the rust.For me it was going to be a long process anyway because I was then turning the chain to sort out the rust on the rest of it.Bike chain is mostly rust free now which is great, although a degreaser I used earlier also helped to loosen and remove some of the rust, to my surprise.If I had to, I would buy this again, just the price is high, but it does the job.

Having used Jenolites ferrous corrosion removers before, I was interested to try this for chrome. it works but as it is non hazardous you need to use several coats or soak the part or leave a wetted cloth on the part. This will jot work with light chrome plating where the corrosion has started to lift the plating. For light surface corrosion it will help. As this is a non hazardous product, it isn't as harsh as the ferrous ones and hence not as effective, but follow the cases as described above (these came from Jenolite tech support by the way). Only 3 stars as it needs reapplication. Probably a little unfair, as my use case currently hasn't followed tech supports recommendations, plus time to attend to it. Buy and try is the only real way to assess this.

Easy to use, cleaned off most of the rust and the best part is I can reuse it again.

Brought this some time back and wished I hadn't, as had for a while before using on rusty domed top screw nuts , left them in this fluid, in a clean jam jar ,3 days just went cloudy and turned the nuts even more rusty, waste of money, wish I had of tried this b 4 the returns date,ended up flushing down the sink

For gently getting the rust of a set of train 3.5 inch bogies I could think of anything better. Immeresed for 24 hours and the wheels came up clean and undamaged. This is not cheap but, considering what it does, well worth the money.

I used the item as soon as I received it, it removed the rust very well a good product.

Der Rost im Maxitank ist wie wekgezaubert das Mittel ist echt super.

Lleva el producto 48h en el interior del depósito de combustible de la moto y aun no ha eliminado todo el oxido por completo aunque si una gran parte. Esperare otras 24h antes de vaciar y enjuagar varias veces. Limpia si, no es instantáneo ni milagroso pero lo doy por bueno al no poder sumergir la pieza que es lo ideal ya que es un interior de deposito. Lo recomiendo.

Effettivamente un po' costoso, ma fa bene il suo lavoro. Ottimo per il fatto che non è nocivo, questo permette ti usarlo anche in ambienti poco ventilati. È totalmente inodore. Ho messo delle foto di una flangia già trattata che è parte metallica di una sonda di riserva carburante e i risultati sono stati più che soddisfacenti, da notare che ha pulito anche la lamella in rame dagli ossidi che la ricoprivano. Il trattamento ad immersione nel liquido garantisce l'azione anti-ruggine fino nei punti più inaccessibili. Purtroppo non ho pensato di fare una foto prima del trattamento, ma vi assicuro che era messa proprio male con ruggine che aveva fatto spessore. Questo risultato è stato ottenuto dopo una immersione nel liquido per 48 ore. Utilizzandolo in un contenitore statico, è necessario del tempo perché il prodotto possa svolgere la sua azione antiruggine; io penso che se si usasse Jenolite Rust Remover in una vasca vibrante, si riuscirebbero ad ottenere ottimi risultati in tempi più brevi.Le istruzioni suggeriscono che può essere usato oltre che sui materiali ferrosi, anche su rame, come nel mio caso, cromo, ottone e alluminio.Non posso dire dopo quanto tempo la soluzione va in saturazione, cioè quando il liquido non è più in grado di rimuovere la ruggine, solo con l'esperienza si può dare una risposta. Comunque per ora io mi ritengo soddisfatto.

I submerged a rusty axe head into a plastic container containing the product overnight, as the instructions said, but I could discern no difference afterward. There didn't appear to be any chemical reaction of any kind. So if it's doing something, it's rather weak, and certainly not enough to remove rust from larger tools. Maybe it would work for light rust on screwdriver bits?

Die Einwirkzeit dauert sehr lange, aber das Ergebnis ist super. Ich habe den Rostentferner für einen Tank mit mehreren Kammern gekauft. Das Ergebnis ist wirklich super.