🎥 Switch It Up: Elevate Your FPV Game!
The SummitLink FPV 3 Channel Video Switch Module allows you to effortlessly switch between three different video sources, enhancing your FPV experience with a user-friendly 3-position switch. Compatible with various FPV cameras, this compact and lightweight unit ensures robust performance and seamless integration into your setup.
P**H
Works great with 3 cameras.
Used a 3 way switch on the Taranis Q X7 to select between 3 cameras.
K**R
3camera switch for my FPV rc plane.
Fast shipping. Exactly what I need.Thank you!
J**X
Overlays
Am I the only one that is getting half of video per channel? I am now using the G.T. Power video 3 switch. Worked great on bench (G.T.) then did a careful install on build then stopped working. None of these of several, I purchased are doing any better than above stated.
J**Y
Updated. Second unit works.
UPDATED:Second unit came today. This one works, and switches nicely and quickly.I ran power from the main battery (7.2v) to one of the cameras, and tapped off that to In2 on the board. Signal from that cam went straight to the In2 S pin.The vTx plugged in to the OUT port - all three lines. This arrangement gave me video out to my monitor. I attached my main cam to In1, and I had them both working.This arrangement didn’t work for the first board. It is a failed unit, getting returned.Both boards give me a red LED when they are turned on. No change during operation (or attempted operation). Some other boards change LED color based on the switch status. Not this one.Original Review:Worked once, then nothing. Has the red LED, but no output. All connections are correct. I’m going to return it as defective.
A**O
Five Stars
Work great
S**
Good little switcher
Works well. If it worked with all cameras i would have given it 5 stars.
C**R
doa pos
No clue if it works or not as I decided not to repair it.Input 1 negative terminal was not soldered to the board, input 3 signal terminal was cold soldered, 1 of the pins for servo was cold soldered and loose... I tossed it in the parts drawer as I may find a use for it or get bored and fix it. Definitely not worth the money i paid, never had this problem with hobbyking boards.
S**.
I love it.
Voltage in equals the voltage out. If you have two different cameras that have different voltage requirements, be careful. I had to build a small voltage controller to change the output voltage for one camera. Otherwise, I love it.
Trustpilot
1 month ago
3 weeks ago