AntLux 72W Commercial LED Wraparound Fixture 4FT Office Ceiling Lighting, 8500 Lumens, 4000K, 4 Foot Low Bay Flush Mount Garage Shop Lights, Integrated Wrap Light, Fluorescent Tube Replacement, 4 Pack

These are a nice upgrade, replacing the old fluorescent fixtures in the garage. Very bright, like the 4000k temp

These arrived quickly and were wrapped well for transit, but arrived with a few dinged/smooshed corners. Luckily, my husband was able to bend them and get the lens cover off so he could install them. Installation took less than 15 minutes! So lightweight and easy to install. These link together, so we put two in a row in our basement playroom. They are bright and exactly what we needed!

I have installed 12 of these lights thus far in my home. I needed more light in the garage and attic these are what worked for me. A clean design, bright light, a Quality item. I'm happy.Note, be sure to reinstall the lens as pr the instruction label on each light otherwise they will in time fall out. Ask me how I know, lucky the lens are very sturdy and bounce!

Beware that while this fixture is advertised as offering 3 color temperature settings (which is true) it defaults to the 5000K every time it is turned on. If you prefer the 4000K or 3000K color, you must turn it off, then back on, within 0.5 to 3 seconds to change it to 4000K and repeat this on-off process a second time to change it 3000K, every time you use it.In other words, it does not have a physical switch on it to set it permanently to any of 3 available color temperatures. If you like the 5000K (the brightest white), this fixture is a good choice as it is the default. If you want the 4000K or 3000K color, you may want to look elsewhere.

I just got done installing twelve of these LED lights in my house. My old lights were T8 4 Ft. Three years ago I replaced the T8 florescent tubes with LED tubes & these LED strip lights work a lot better & are very light to handle. I really like the three brightness settings.I highly recommend these lights. I just need to see if I can buy a single light for a spare.

UPDATE: Antlux has a very responsive customer service and they took my comments serious. They took care of my issue immediately. Upgraded from my initial 2 star review to 5.Had expected more from these lights. Arrived damaged in box which I unfortunately found out too late to return them. Cheaply made which easily results in a bend housing. Shade can be very hard to remove and install when the housing had warped a little. I don’t know if I will keep these as they look cheap. Probably just use them as a temporary lighting solution until I complete the redo of my garage. Would not recommend.

Where to start? In short, poor packaging and not what description says ("wraparound"), but LOTS of light!ALL of the four fixtures in the package were damaged at the ends so the plastic cover would not come off. Had to be straightened by HAND. Fixtures are made from VERY flimsy sheet metal so DO NOT pound or hammer on them in any way. Straighten by clamping two wood blocks where the fix needs to be bent and then bend back into shape SLOWLY by hand. to prevent damage to paint. Make SURE the ends are bent open far enough, about one to two mm, to allow the plastic cover to be inserted with minimal force. On the inside, the wiring covers had all shaken loose during shipment because the screw holes were STRIPPED. Attach with bigger self-tapping screws to fix. MOUNTING: The LED strips go OVER the fixture attachment holes so these cannot be used to anchor the fix to the ceiling; depends on how far off from a right angle the mounting screws are in the electrical box. Just insert the screws in the box and hang the fixture from them and then screw them in ALMOST snug, but allow enough to rotate the fix to position. Then use OTHER screws to secure to ceiling. One code violation note; the knockout will require a grommet or a fitting otherwise the power wires will rub against the sharp edges of the hole. Considering the price of these fixtures they could have provided three two-cent plastic electrical bushings/grommets. Additionally, use WHITE tape and secure any loose wires to the inside top of the fix so the LEDs won't cast light on them. The knockouts at each end leak light, so cover then on the inside with opaque tape. ONE SERIOUS NOTE; these are NOT 'wraparound" fixtures as the description claims. A 'wraparound" fixture cast light down and out the sides to the ceiling; hence the light "wraps around". These cast all light downward and do NOT illuminate the ceiling. For some this might be OK, but I wanted to light up the kitchen ceiling. Should have got AntLux "Slim" fixtures, but would have to buy and try first! Now the important thing; these are very bright (do NOT look at them with cover off) and give off lots of light. Hence two stars and not one.

Super bright installed 4 in garage and it’s like daylight