Dremel Rotary Tool Multi-Vise, 3-in-1 Attachment, 360º Stationary Vise, Stand-Alone Clamp, and Tool Holder, 2500-01

Is a great product for detail deemed work! So basically you can tighten it in multiple locations to set it at the right angle and spot go roti to work and will grip your work piece, very easy you use, also can switch it to hold your Drexel tool instead, that way you can hold the work piece up to it and it’s firm and won’t bounce on you, very useful tool in my opinion, and have been using it for every project since I got it a few days ago!

This vise worked perfectly to hold my Dremel and the sharpening tool. It secured my Dremel well to the table due to the excellent design of the clamp. Most clamps have a small metal fixed jaw and it will slide around and reduce the tension that can be applied to secure it. Other clamps will also damage the table top. This table clamp does NOT have that problem. The fixed jaw is big and it is a non skid pad so that the clamping pressure helps to firmly secure it to the table without damaging the table top. You don't need a great deal of clamping pressure to secure the clamp to the table, and still have it moving around, like most "C" clamps. It is a great design. It also comes with a tool that allows the Dremel to be securely attached to the clamp, as well as an additional vise for attaching other items to the clamp. The Dremel itself can be adjusted to slight horizontal angles, if needed, and then tightened down by hand easily so that it will not move. This is an excellent table clamp and vise for working on small to medium items. I used it to mount my Dremel to sharpen blades for a mixer, and, it worked as well as a bench grinder. Great little tool and problem solver. I ordered it for work and my boss was very impressed with my choice and the way the product solved the problem. Highly recommend.

I am writing this review to inform those who may want to use the vice as a tool holder with a Dremel Flex Shaft attachment. I will try to explain this as clearly as possible and hopefully the pictures will help. Because of the thickness of the Tool Holder Adapter that comes with the vice, when the the Flex Shaft attachment is threaded onto the nose of the motor the nut bottoms out and the Housing on the Flex Shaft Attachment does not come up tight. If you use the tool this way, when the shaft is manipulated the spinning Cable Adapter will contact the Housing on the Flex Shaft Attachment and make a grinding noise. What is needed is a spacer with the following dimensions: Inside Dia.=0.450, Outside Dia.=0.650, Thisckness=0.080 inches. The spacer is placed inside the plastic nut that attaches the Flex Shaft Attachment to the motor, and up against the metal Housing. This makes up for the space created by the Tool Holder Adapter that comes with the vice and eliminates the play that allows the parts to grind. I really like the features of the vice and this method of holding the tool works great for me. I think it is much better than the tool holder posts that you hang the Dremel motor from. It would be nice if Dremel provided this spacer with the Vice for those who intend to use the vice as a tool holder when using the Flex Shaft Adapter.

Delightful little vise with a really decent grip. Solidly attached to my work table in the basement but easy to remove it whole or the top part. You can angle it, you can rotate it, you can take it apart and use the cross bar as a stand alone clamp style vise (on your kitchen table) :) Can you use it to rebuild your whole house? No. But its flexibility rocks and great as a third hand for your kids projects or repair work around the house and quick cutting (I use to to hold PVC pipe on one end while I cut with one hand and support with the other).

Great addition to any handymans tool kit. Very easy to set up and use. Very adjustable from clamping to a table to using it as a table top vise. Soft grip jaws are easy on your work pieces as well. Great product.

I love this vise and the many things it does for me. I'm using it in my shop for wood carving mostly. I was only a bit worried about the mostly plastic construction. Do not give it another thought. It's strong and holds really well to whatever you're attaching it to and whatever you may be holding with it.

Wish I had bought this years ago, works fantastic for my RC Truck work bench !

I bought the Dremel 2500-01 Rotary Tool Multi-Vise, 3-in-1 Attachment with 360 Degree Stationary Vise, Stand-Alone Clamp, and Tool Holder , Grey to hold small wood carvings boxes, and other wooden forms as I work on them.I was a little hesitant but figured the price for the Dremel name would be justfied...and it is.Pros:⁂ Easy to maneuver⁂ Fittings are snug so pushing chisels and knifes through projects does not loosen them⁂ Fittings are large enough to operate by hand without need for pliers or tweezersCons:⁂ Not sturdy enough for mallet work⁂ Odd shape gives a large footprint for storageAll in all an excellent tool I hope to use for many years,