🔧 Switch Up Your RV Game!
The RecPro RV Toggle Switch is a high-performance control panel switch designed for RV tank systems. With a robust 20 amp current rating and an IP54 weather-resistant design, this toggle switch ensures reliable operation in any environment. The lighted LED indicator allows for easy monitoring of heater pad status, making it a must-have for any RV enthusiast.
| Operation Mode | Toggle |
| Current Rating | 20 Amps |
| Operating Voltage | 13.5 Volts |
| Connector Type | Screws |
| Brand | RecPro |
| Terminal | Screw |
| Actuator Type | Toggle |
| International Protection Rating | IP54 |
| Number of Positions | 3 |
| Specification Met | Ip54 |
| Control Method | Touch |
| Connectivity Protocol | X-10 |
| Wattage | 2.7E+2 |
| Unit Count | 1.0 Count |
| Number of Items | 3 |
| Manufacturer | RecPro |
| UPC | 193652026594 |
| Item Weight | 0.81 ounces |
| Package Dimensions | 3.1 x 2.9 x 1.1 inches |
| Manufacturer Part Number | RP-1043 |
| Bulb Type | led |
| Voltage | 12 Volts |
M**W
Know your stuff before you try and do you own control wiring
This is a SPST lighted switch. The negative/black/ground connection is only necessary if you want the internal LED to illuminate when the switch is in the ON position, otherwise the two pins are open when OFF, connected when ON. Can't get much simpler than this. The seller even included wiring diagrams. Not rocket science people...Works fine for what it's intended to be in a nice panel. Wham bam done.
M**.
Just what i needed
Looks good and fair priced, glad i got it, lights up when turned on, and explains what the job is for this switch
N**O
Terrible.
So I bought the 120v recpro heat pads for my camper and finally got around to installing everything. Get the switch wired up and applied power and nothing happened. Did some research and it appears the illustration of power to pad and ground is reversed...discovered something was not right when the illuminated switch didn't work. After researching I switched ground and power and the illuminated light came on and burnt out... Look at markings on switch and it's a 12 volt... So now I don't know if my pads are good due to the bad wiring picture, and the switch light got zapped from the 120v.
D**N
Tiny!
Cannot tell how small it really is in the pics. Not sure it can handle the amperage, will see soon.
Z**C
Quality product
Purchased this to power the tank heaters on my Wolfpup. Works great.
M**T
They work.
They work.
T**S
Great product
Works great. Looks great
D**.
Cheaply Made and Pretty Sure Mine Are Used
I had high hopes but am disappointed. Keep in mind that all of this review is just my opinion.The product arrived in a bag that was well worn. I suspect these are used or returns. Maybe not, but the packaging looks too worn to be new IMO.No instructions. Everything feels cheap. The seller brags about being in the heart of a county that has a lot of RV manufacturing. I’m wondering now if they don’t drive around to this manufactures buying their B stock/rejects. Maybe, maybe not. I’ll never know for sure.One picture I attached shows the way it arrived. No instructions and the bag in bad shape.The other picture shows the pins bent on one of the switches.I’d would have returned these, but the install window was tight. There wasn’t enough time to get replacement switches. So far, they work. I used an ohm meter to map out what each pin on the switch does. And really, they didn’t even need to include “instructions” just a simple pin out diagram would have sufficed. But, again I suspect that would have been in the bag for new switches. It’s just one more indication that this is used/returns or B stock. Again, that my opinion but I’m coming to that after decades of experience buying new and used things.I won’t be purchasing RecPro products again. The quality is extremely low IMO.
Trustpilot
2 weeks ago
1 month ago