LAFORMO741-579 Rear Passenger Side Power Window Regulator with Motor Assembly Compatible with Silverado/Suburban/Avalanche 1500 2500 3500 00-06 Cadillac Escalade 02-06 GMC Yukon XL/Sierra

Quick , easy install

It seems a bit slower than the other windows, but it works great. I was happy with how easy it was to install, just watched a couple of YouTube videos.

Needed only one of these but they were priced right. Everything fit just right into the door and everything was plug and play.

Overall better than other window motors I've gotten from Amazon. Good build quality. Holes are mostly good, one bolt was a mm off but still fit with some effort. Window traverses well.

Great value. Easy to install except that one on the three threaded holes on each regulator was off by about half a hole diameter from the mounting hole in the door. I just used a file to make the hole into a slot and everything lined up. Only other complaint is that the window goes up and down slower than the original regulator. But considering the price, it’s not a big deal.

Works great

I was a little skeptical about doing this install but a good friend who is a master mechanic told me that this is an "introductory level" install. He was absolutely right! These worked great after being installed!If you have ever been on the fence about tackling this job, then all you need is a 10mm socket/rachet or open ended wrench after the door panel is removed. It goes like this:- Before starting, use painters tape on the outside of the window going up and over the door frame and onto the inside part of glass(this will make sense later)-Remove the 2 door panel screws(Tork screwdriver T15 or T20)-Remove the cover plate behind the door handle(a flat tipped screwdriver works great, it pops off)- lift door panel slightly and pull outward gently.- Disconnect the window switch plug and Door panel light plug.-Set door panel to the side at this point.-Peel back the clear plastic covering but not necessary to remove completely.-Disconnect the Window Motor.-At this point, let's loosen the nuts, but don't remove, on both sides of the upper mechanism that the window glass sits into.- Then there are 5 nuts and bolts to remove(I think there were 3or4 bolts and 2 nuts, all are 10mm.- If you are at this point, the next step is to remove the mechanism from the door.- Once mechanism is removed I would encourage you to clean the door locking bar of any dirt and grime, you will thank me later😁.- Also, spray the door locking mechanism with WD40, this will help everything work better as well. In my case, this truck had tons of dust and dirt so cleaning these items made the door open and close and well as lock much better.- Install is reverse of removal.Hope this helpsI only have 4 stars for longevity and will update down the road if there are problems

It fit perfect ! It works great ! I Installed it in like 25 minutes.