ELEGOO ABS-Like 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing, 1000 Grm (Grey)

ELEGOO ABS-Like 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing, 1000 Grm (Grey)

Q: How do i clean the print and allow the print to stay clear? when cleaning it with ipa it turns foggy. is there a better method?

Clean your print with 95% or above IPA in the first bath (you can use a soft bristled toothbrush to make sure you get the uncured resin out of the small details if necessary. Allowing IPA to stay too long on uncured resin causes cloudiness and “white-ish streaks”. After agitating your piece in the first bath, give it a quick dunk in a second bath of clean IPA (I prefer to use a misting spray bottle instead). Pat dry and or wash it in a third bath of clean, distilled water. Let it dry (or carefully blow dry with some canned air). Remove your supports and then set out in the sun or use a “curing oven” or UV nail dryer to cure. You should not have any streaks from uncured resin at this point. With transparent or translucent prints, follow up with a layer or two of UV resistant clear coat to regain your transparency or translucency. :)

Q: Abs-like resin - how to compensate for volume shrinkage/linear shrinkage in laymen's terms? i need accurate scale.

Shrinkage varies with shape and volume. Print a test model, cure it, then measure. Scale the model proportionally by the amount of shrinkage. If a part is designed at 20mm but prints at 18mm, then scale by 20/18*100. You can set the scales independently for the X, Y, and Z directions, then when you print the final model, or any subsequent copies, they will be printed precisely.

Q: Is the cured resin reasonably flexible for printing miniatures? the current Anycubic resin I am using (came with printer) is too brittle. Thanks!

I've used many bottles of this resin in grey for minis and have printed maybe 100 so far with great results but it is still brittle, so to speak. You can still knock them around a bit on the tabletop but a drop from table to floor can break off swords, arms and such. I believe this condition is native to resin printing. My resin printer is an Anycubic Photon by the way.

Q: Can i pour this into a silicone mold and make jewelry with it? I dont have a 3d printer and want the transparent uv resin for jewelry.

Maybe if it was a very shallow mold and you had a nice, strong uv lamp. The uv doesn't pass through much resin without direct contact. I would just stick with epoxy resin in a mold.

4.7/5

Product ID: 269558221

Secure Transaction

⚡Rapid UV curing at 405nm

💧Low viscosity for smooth flow & easy cleaning

🛠️ABS-like toughness & impact resistance

Product is unavailable

Oops! The product you're looking for is currently unavailable. Explore similar products for a perfect fit!

Frequently Bought Together

ELEGOO ABS-Like 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for Mars Saturn Jupiter MSLA DLP LCD 3D Printing Grey 1000g

ELEGOO Mercury X Bundle with Separate Wash Station and Cure Station for Large Resin 3D Printed Models, Compatible with Saturn, Mars MSLA 3D Printers

ELEGOO ABS-Like 3D Printer Resin 3.0, 405nm UV-Curing Photopolymer Resin for Mars Saturn Jupiter MSLA DLP LCD 3D Printing with Strength and Toughness, High Precision, Low Viscosity, Grey 1000g

Description

⚡ Print Fast, Print Strong — Elevate Your 3D Game!

SPEEDY CURING - Highly sensitive to 385-410nm UV light for rapid solidification and faster project turnaround.
EFFORTLESS FLOW - Optimized low viscosity resin guarantees smooth layering and fewer print defects.
PRECISION PERFECTED - Ultra-low shrinkage ensures flawless, dimensionally accurate prints every time.
DURABILITY MEETS DETAIL - ABS-like resin strength delivers high impact resistance with less brittleness.
UNIVERSAL COMPATIBILITY - Works seamlessly with most LCD 3D printers, especially ELEGOO models.

ELEGOO ABS-Like 3D Rapid Resin is a high-precision, low-shrinkage photopolymer designed for LCD 3D printing at 405nm UV wavelength. Combining ABS-like mechanical strength with excellent fluidity and fast curing, it delivers smooth, durable, and dimensionally accurate prints. Compatible with most LCD 3D printers, this 1kg grey resin is ideal for professionals seeking reliable, high-quality 3D printed models with minimal post-processing.

Specifications

Brand	ELEGOO
Manufacturer	ELEGOO
Model	ABS LIKE GREY
Product Dimensions	15 x 8 x 8 cm; 1.2 kg
Item model number	ABS LIKE GREY
Printing Technology	DLP
Compatible Devices	Laptop,Smartphone
Number of items	1
Wattage	40 Watt Hours
Batteries Included	No
Batteries Required	No
Material	Photosensitive abs-like resin polymer
Does it contain liquid?	Yes
Manufacturer	ELEGOO
Item Weight	1 kg 200 g

Have a Question? See What Others Asked

How do i clean the print and allow the print to stay clear? when cleaning it with ipa it turns foggy. is there a better method?

Abs-like resin - how to compensate for volume shrinkage/linear shrinkage in laymen's terms? i need accurate scale.

Is the cured resin reasonably flexible for printing miniatures? the current Anycubic resin I am using (came with printer) is too brittle. Thanks!

Can i pour this into a silicone mold and make jewelry with it? I dont have a 3d printer and want the transparent uv resin for jewelry.

Reviews

4.7

All from verified purchases

S**E

Good Quality resin

Good quality resin, exhibits the properties of ABS.

25.07.2021

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

View all Trustpilot reviews