GOLDEN FIELD N-1 Computer Case Gaming PC Case ITX Case Mini Size Desktop Computer Shell Cases

Gabinete muy bueno, muy bien construido y realmente es fácil armar en el, organizar cables. Además que al darle comprar redujo un poco mas el precio quedando en 900.00 MXHice una PC sencilla aprovechando que tenía un proce 2200g y un par de RAMS (2x8) sin usarutilicé una mother ITX MSI A320I-S01 BULKuna fuente normal un poco mas corta pero sin ser mini, que deja muy buen espacio por si después agrego una GPU, modelo Corsair CV450 de 450W, ATX, 80 Plus Bronze.No metí disco vía SATA y aproveche el m.2 con una Unidad de Estado Sólido ADATA SWORDFISH de 500GB, M.2 NVMe PCIe.Y la lonchera esa que ven en la foto realmente vuela, enciende y carga Windows en segundos

I give this case 5 stars, but that's because you cant just go with half stars. First off, great little case for the money. Builds perfectly without any issues. It also will handle a full size power supply, which I did not know 'til after I started assembling it with my mini power supply. It does not, however, have the air flow you would think it does. 1 fan port is not enough to get rid of much heat. Granted, I am using it as a gaming rig, but you would figure somewhere the designers would try this out in many applications just to see how it fares. I have my CPU on a single fan AIO, but my RX 570 is still air cooled. If there was 1 more fan port, heat would dissipate much better. Still, great case and small in size. Perfect for what I was after.

Brilliant little case.After buying the Silverstone SG13 and the front panel wouldn't close, I ordered this. The SG13's layout is nowhere near as good as this.The SG13 had the PSU directly over the CPU, leaving only 60mm of clearance for the cooler. This lead to severe heating issues. That issue doesn't exist with this case, the PSU is situated at the front, with a pas through cord to the back of the case. This means you can fit a full size CPU cooler in the N-1 mini. I used the Arctic freezer 34 for reference.The SG13 also doesn't have a reset switch unlike this little gem!Love this case, can't recommend enough.

This case (GOLDEN FIELD N-1) is really well made, the rubber on the feet have an excellent grip. The only flaw I could find while building my PC was that it's easy to strip the threads when installing the screws for the graphics card.Small note: the maximum motherboard size is listed as 220x170mm, however I was able to easily fit my MSI H81M-P33 motherboard, which is 226x173mm. On the slots side, my motherboard almost touches a rivet on the side of the case (I can still slide a piece of paper between the rivet and the motherboard without friction) so I would say 226mm would be the absolute maximum motherboard width.As for the 170mm motherboard limit, it can be extended if you're using a smaller SFX power supply like I did with the help of an ATX-to-SFX mounting plate (the case itself only has ATX power supply mounting holes). I did not test installation with a regular ATX power supply, so maybe the limit really is exactly 170mm with a regular ATX power supply.Be advised that there is only the four mini-ITX mounting posts for the motherboard, so if you have a micro-ATX that can fit in this case, be careful when connecting any cables that extend beyond the mini-ITX area since the motherboard will not be supported on that overhang.For the power supply, I highly recommend a modular one, and a smaller SFX power supply with an ATX adapter plate if you can afford it. It will make wiring a lot easier especially when using a graphics card longer than 175mm. If using a shorter GPU, I guess a regular ATX power supply would work fine and leave plenty of room for the power supply cables between the GPU and the front of the case.Please note there is no 120mm fan included with the case, I installed a Noctua NF-S12A PWM and it seems to be working fine without really adding much noise, if any.

Una caja que me ha sorprendido gratamente. He podido instalar una placa microatx sin ningun problema, una fuente atx y un disipador de serie de intel. La caja sin nada no pesa nada, y con la placa, memoria, cpu, el disipador, un ssd de 240gb, la fuente atx y un ventilador de 12mm en la parte de atras no se nota nada de peso. Muy facil de transportar y además me parece muy chula.El nivel de ruido es inapreciable, claro que eso es debido a la calidad de ventiladores, pero el caso es que al estar bien ventilada por su perforaciones no hace falta tener los ventiladores a tope. Con pruebas benchmark de esrtes de CPU no he llegado a temperaturas superiores a 50º.El montaje es muy sencillo, y practicametne se pueden desmontar todos los paneles para que puedas acceder al interior. Viene preparada para montar SSD y HDD de 3.5. Lo malo es que solo puedes montar un ventilador de 12mm para sacar calor, pero haciendo un poco de brico se podrian poner algunos mas, aunque al no usar grafica (solo la de la cpu) no se calienta demasiado.La recomendaria a 100% y la volveria a comprar. Seguramente, en un futuro bastante cercano, compre otra para instalar un ryzen con apu.