Readytosky® QAV-R 220mm FPV Racing Drone Frame 5 inch Carbon Fiber Quadcopter Frame Kit 4mm Arms with 5030 Props and Lipo Battery Straps

When I purchased this frame I had asked if replacement arms were available. Makes sense to me if you buy a frame with replaceable arms you'd sale, replacement arms. That's the whole point to buying this type of frame over the unibody frame. Brake and arm...replace it rather than having to move you entire build to another frame. I contacted the seller and he did not sale arms separately.Anyway...turns out the arms survived all the crashes and still have nearly no flex to them. This frame is well built with good carbon fiber. After crashing it countless times, it's hard to imagine it only cost a little over $20 bucks. Why am I paying up to fifty dollar looking for the best frame for my buck when it's sitting right here in front of me.PS . I used motor guards with this frame. If I could change anything I'd extent the arms past the motors to protect them. Motor guards work, which makes this frame work for me, their just a hassle. Extended arms that reach beyond the motors work good enough for protecting motors, just makes sense. So for that reason only I give this frame 4 stars.

I have had the original Lumenier qav r frame that this is cloned from and decided to try this one out instead of spending another $100 on an original. I have to say I have been pretty impressed and have put this frame through serious tests. I fly pretty hard every single day and this frame has taken everything I have thrown at it and keeps on ticking. I did end up breaking the top plate but it definitely wasn’t due to poor construction. Just a super hard hit and since it’s top mount battery it crushed the top plate. But that has happen with the original Lumenier design as well. If anything I would make the top plate double thick and use s little longer screws. I ordered another frame and JB welded 2 top plates together and used the longer screws, it is so much more solid and can take s but more impact from battery weight. Top plate is the only reason I gave it 4 stars, if they doubled the thickness of this top plate this thing would be absolutely amazing for 30 dollars. I still love it though!

Very good frame, I had several crashes and still resisting, I had problem with the rubber insulation for the VTX antena, that the frame hole for it is too smal and it broke while installing it.. I checked other frames and the hole for the antenna is little bigger so the antenna never touch the frame and the insulation fits perfect..When the antenna touch the frame start giving noises that cannot be removed with low ESR capacitors or any other filter type.. There is no much space in the antenna hole in the frame to make it wider which will be the best option.. I plan to get a new rubber insulator and open a new hole on other place on the plate..The only weak part I see on this frame is in the lower plate in the back area where the weight of the battery (top mounted) put lot of stress during crashes.. Still is a very good value!!!!

Bottom plate was 1.5mm instead of the advertised 2mmEDIT: Seller promptly sent a replacement 2mm bottom plate, bumping this review to 4 stars as the build is great, the carbon fiber layers are tight, not an exact replica, but close enough if you are 3d printing your own stuff/adapters.I've already crashed this guy in some weird ways, it is pretty much invincible, I've taken chunks of carbon fiber out of the arms in a high speed crash into steel wire, but they're still straight and have not broken. Will consider buying a second one for replacement parts as they'll eventually be needed when I reach 60mph+ crashes around concrete.

Good: Good frame. Good price.Bad: Can't find replacement parts. For example, my top plate broke and it seems the only option is to purchase an entire new frame or get a similar 2mm top plate for 17$ from getfpv. At 24$ you may as well buy an entire extra frame for the one part but then you will have a bunch of extra parts that probably won't break very often. Now I am trying to find a different frame that lets you buy the individual parts so I don't have to deal with this every time something breaks and end up with multiple frames that are all missing the top plate.Side note: No point in giving the props. Does anyone even use them?

I bought this for the x220s drone. It is smaller than the x220 frame. The design is different and smaller so you cannot interswitch parts, therefore it is not compatible. This happened to me when i tried to align the bottom frame with the pdb and it was too small.

cheap frame, build quality was fine for the price. its not an armattan or even a source 1, but its solid, will get you into the air, and goes together easily. I recommend this frame for a 5 inch quad if you dont have or want to spend the money on something nicer or name brand. would buy again.

The product was delivered fast and on time. Very impressed with that. The product was packaged nicely and was in damaged. I ended up building a very fast quad with air T40 2450kv motors with turbomach 30amp sefm esc's. Sp racing f3 evo flight controller. Matek pdb. All-in-all this thing flies fast and the frame is strong and sturdy.