CO-Z Airbrush Spray Booth with Dual Fans, Portable Paint Spray Booth for Airbrushing with 2-Speed Fan & Separate Light Swich, 3 LED Lights and Exhaust Hose, Hobby Spray Booth for Painting Model Craft

Put it together (easy) although the directions are a bit unclear, but the fans the lights all work and I am very pleased! The lights and fans even have a rheostat so the lighting and fans can adjust them.

Summary: exactly as advertised, recommended with no reservations.Model #: HS-E550 (two fans, variable motor speed and light brightness, exhaust ducting provided.) Note: as far as I can tell there are only two basic, Chinese-made units being sold, single- and double-fan. Pick the additional features you want and shop for the best deal.Shipping: the unit was well packed, the carton arrived sealed. The turntable and power supply were loose, but undamaged. The latter is a function of the destination country, as the unit itself is 12VDC, 5A universal, so I'm guessing the importer inserts the appropriate power supply.Assembly: very easy, I only needed the pictures to assemble (text is also provided).Usable inside area for the hobbyist: 20 inches wide x 12-3/4 inches high x 13 inches deep, back corners slightly reduced by 45-degree angles.Ducting: will fit standard 4 inch vent ducting and/or clothes dryer exhaust ducting kits available at any USA home center. Unaltered the hobbyist can place the tapered duct end outside of a window.Noise level: the manufacturer claims 53 dB. The fan speed can be adjusted. I measured noise levels with the Android sound meter app. The app measures standing in front of an operating kitchen microwave as 63 dB. With the sound meter placed in the location of a spray-painting operator, the unit at full power has a noise level of 67 dB, half power 63 dB, lowest setting 47 db. The unit itself is barely audible behind a closed door. As someone who operates a hobby woodshop (always with hearing, eye, and breathing protection!) the unit does not seem loud to my unprotected ears.Light level: adjustable, very bright at full setting. The light color is close to daylight, perhaps with a very slight blue tinge. I would estimate the color temperature at around 5000K.Filter: the filter elements can be removed individually from the back wall of the hobbyist side (i.e. they can be removed from where the painting is done). They do not seem to be fastened to the framework of the unit itself. It appears replacement elements can be cut easily cut from bulk stock, and if cut slightly oversized, can be inserted securly around the inside edges of the filter frame.Air flow: I could not evaluate this. The flow at the terminal end of the exhaust hose seems very vigorous. My face, when placed in the painting area, can feel the breeze. A 1x2 inch piece of ordinary paper will become stuck to the filter element when tossed into the air from a distance as far away as 8 inches forward of the back wall of the painting area. I suspect paint mist/fumes will be cleared from a lot further out, but I am still waiting for pumbing parts to arrive so I can connect my airbrush to my compressor.Overall I was very pleased with this purchase.Added 9/15/2023: I now have my air compressed installed for my Paasche dual-action, siphon-feed airbrush. I operated it at around 25 psi. Experimenting with both paint as well as airbrush cleaner this unit easily sucked all of the paint and chemicals into the exhaust. I did not detect the odor of either. I remain very pleased with this purchase

The spray booth works fine. Assembly instructions could be a little more clear, I had to check a video in youtube of someone building a similar one to see how to install the lights. Lights are ok brighter than my room lamp, but they can get a little hot, touching them won't burn you or anything, but it just surprises me that these led stripes could this hot. Fans can be a little noisy, specially at max speed, but is tolerable and works great for extracting paint residues and fumes.All in all, I'm quite satisfied with the product. I'm sure there are a lot of better spraying booths out there, but for gunpla enthusiast like me, this more than enough to paint safely.

This thing is great, easy to set up (5 min without reading the instructions) and use. It arrived very quickly and was well packaged.I painted with it for the first time yesterday and it captured all of the fumes, and I had forgotten to vent it out the window at first.The lighting is perfect, and the size is ideal for 1/48th scale aircraft. I wouldn't want to go any smaller for this scale, for my larger kits it will be tight.Not noisy at all and the light/fans have dials to turn the fan/light up and down, though I'm not sure why you would ever do that as I always want all the light I can get and of course the fan needs to be pulling hard to be effective through the filter.

Got this booth to replace a much older and larger booth that needed to be put to rest. So what can I say? it's a spray booth that I can pack away after a session. It's been just over 3 weeks since receiving it. I have been using it a good amount during this time, 4 days each week for roughly 3-3.5 hrs at each time. Being in an apartment, I was a little worried that it may be a bit louder than rated but its perfectly within the listed range. The adjustable fan speed and lights have so far been working perfectly.The only strange thing was the fans having a slight smell when turned on. Not a burning nor electrical smell, but a chemical smell. This lasted for about a week then lessened and now no noticeable smell. I will keep an eye on this as it was the only concern with the booth.So far over all happy with the purchase.

This is amazing. Bought it to custom pain shoes and contains the paint well. Easy to set up. Lights are bright.

It is fairly quiet, easy to assemble and clean. Lighting is great and helps immensely with the fumes from airbrushing.

Very impressed with construction of unit .fan speeds, remove odors quickly lighting excels also "well worth the money".