Pwm Fan Temperature Controller Integrator, Remote Control Computer RGB Light Adapter , 8 * 4 Pin Fan Speed Controller Ports , 10 * 5v 3pin A-RGB Ports ，with Magnet （White）

Handy item for flip systems that require "Bling-ing" out.

Excellent product do the job as it says

Great buy, installed on my system and working as desired. I was able to connect all 6 ARGB fans for my pc case to the integrator controller plus the cpu with a fans header and 2 RGB strip connection points remaining for future use. Easy install with the provided simple but well illustrated installation guide. The fan connectors are 4 pins and the fan RGB connectors are 3 pin. It made the RGB and fan connectors on the motherboard unnecessary. I did not use the RGB sync cable for synching with the motherboard RGB controller as it is 3 pin and my motherboard has 4 pin. But, this I found did not matter as the remote controller and the integrator allow me to choose various colour patten modes and the cpu temperature seem to determine the speed of the fans. Overall quite happy with the install. See photos.

Turns one ARGB into 10 ARB and 8 RGB ports.Remote signal is a bit iffy, but using it just as an extension is great.

Ok hopefully this info will help others… I bought these and put 2 new batteries in. One remote worked the other did not..? Swapped batteries and the reverse happened..? But how? I checked both batteries (CR2025) and both are just over 3v … and should work .! So I tested a few other batteries taking voltage measurements , and was a surprise to what I discovered! If a battery is over 3.1v, it will not run the remote!! Yep! Fact!! And if under 3.09v it does!!

This is one of the top brands I recommend this it's very well built and feels strong. Looks good if on display. Definitely worth the money.

dose not work on msI pc not good at all AND CHEAP WIRE THAT BRAKES EASY MANUAL NOT IN ENGLISH AND CAN DAMAGE YOUR FANS YOU USE THE LEDS DOSE NOT WORK RIGHT WITH THE CPU FAN AND IF YOU DO HUCK IT UP TO THE CPU ALL WORK WITH EACH OTHER EVEN CPU FAN BUT WHEN YOU PUT PC ON YOU HAVE TURN DOWN THE FANS AND IF YOU STOP THEM THE CPU FAN STOP TO WHICH SHOUND NOT ANDYOU DONT USE THE CPU WIRE YOU CAN TURN FAN UP AND DOWN BUT EVERY TIME TURN PC OFF AND BACK ON YOU NEED TURN THEM DOWN THE FAN'S SO YES THERE .............. AND AMAZON KNOW AND DONT SEEM TO CARE AND GAVE PEOPLE THERE MONEY BACK

The fans and lights were working perfectly. The remote makes it handy to change colours for boards with no ARGB headers. Even at lower speeds, it quietly keeps the system cool.The reason I’m taking a star away is because every time I turn on my PC, the fans always blows at full speed. It’s kind of loud, wish there was a way to make fans run at lower speeds at startup like other fan hubs.

Bought this for my grandsons pc. We moved his Dell pc into a custom case and wanted something cool to light it up. This is as simple as it gets…all plug and play…magnetic as well, so no complicated mounting. The fact that it was argb was a little confusing at first, as it is not compatible with rgb fans, but that’s the only issue. Looks and works awesome.

I use this as an argb 3 pin controller. My case has a fan/argb hub and also a controller built in, but i have 8 argb fans running and don't want to overload the motherboard connection and the MSI bios has no argb control, nor do I want to use the case controller which requires installing Cooler masters software.I just want a controller to display a static color and requires no software and also one with enough channels where I don't have to use a splitter plugging 2 or more devices into a single channel.With this I can plug each individual argb connection into the controller which doesn't over load the system (no dimming lights when using too many argb devices on a single splitter).I don't plug my fans into this controller, I just plug the fan argb connection into the controller and that is all, no connection to the motherboard.The remote works fine. The controller is behind a steel plate in my case which covers the wiring and of course, the side of the case, so the controller is behind two pieces of metal and the remote works fine from 5 feet away. All buttons work.The only thing I wish this had was a mode for the static colors, like pulse or swirl, I think this is a miss.I bought this because I didn't want to use software to control the argb and also because the mother board bios didn't have any argb control, so while the case hub was fine, when turning on the PC, the argb defaults to rainbow flashing, but with no way to change it.With this I have it set for a static color, no software and the device works really well, its solid.

Eu comprei essa controladora como uma ajuda, pois minha motherboard não tinha a saída 5v 3pin para controlar as ARGB’s das fans, mas essa controladora é incrível, e simplesmente apenas liguei as fans nela e o cabo de alimentação da controladora (sata) que apenas com o controle, eu pude controlar as RBG das minhas fans, ou seja, se assim como eu a sua motherboard não tiver o pino para ligar as argb, basta apenas ligar na sua controladora que ela já liga automaticamente, com o controle.

Prodotto perfettamente funzionanete in tutte le sue applicazioni. L'installazione risulta estremamente facile ed i collegamenti con le ventole ARGB 3/5 pin risultano estremanete efficaci. Il prodotto consente il monitoraggio led di ben 7 ventole tenuto conto che un ingresso è dedicato alla cpu che personalmente preferirei evitare affidando la gesione della stessa alla scheda madre. Il telecomando in dotazione svolge egregiamente le funzioni cui è preposto confermato dal rispetto quasi perfetto nelle combinazione della tonalità dei colori. Esprimo la mia valutazione con 5 stele per due motivi: il primo è per il rapporto qualità prezzo del componente, mentre il secondo è per le funzionalità encomiabili del telecomando che consente altresì di spegnere completamente i led delle ventole qualora si dovesse decidere in tal senso. Per quanto riguarda Amazon c'è poco da dire in termini di votazione: 10 come sempre

Sehr zu empfehlen.