Koch 3202093 Groove Wheel Fixed Flange Cable Pully Block with 2-Inch Sheave, Zinc Plated Steel, 480 lbs. Working Load Limit

I used two of these on a game hoist that I built. They were fastened to the 2" steel tube. They are quite substantial and do the job of guiding the cable very well. They are probably over kill for this application but their size and configuration was perfect. The price was very reasonable and with my Amazon Prime, it was definitely the way to go.

These roller are cheap because, guess what, they are cheap! Mounting metal is very thin and it's almost impossible to mount them without either binding the roller so it won't turn or having such a large gap that the rope comes off the roller and gets stuck in the crack. They might work for something very light duty. I needed to lift and hold about 50 pounds. No way.

Good product

does the job, no frills but they work well, A little play but I fixed it when I fastened them on.

Well constructed, will wool for my needs

I wan to returned right away i mean is a joke i pñaning to use for cable pulley gym but thats is like a litlle toys very dissapoint

Not a lot to say here. Bought it to go on a homemade trailer with an electric winch to keep the cable from rubbing on the trailer. It serves the purpose well. I like the fact of having a pin in the center with a Cotter pin so I can run the cable over or under it to keep it from slipping. Good price for it, too.

It works, but it came in disgusting condition; clearly used and covered with gum.