FLASHFORGEABS Pro Filament 1.75mm Black, 3D Printer Filament 1kg (2.2lbs) Spool-Dimensional Accuracy +/- 0.02mm, Hot Deformation Below 90℃, Great for Printing Heat-Resistant Functional Parts

Very good filament, The sale price brings it down to the regular price of other filaments, but its quality is far better than most. I've used over 12 spools of different colors of this brand of filament all with great results.

I've been using Flashforge ASA for 2 years. The spools seem to last forever as compared to PLA. I always get consistently gret prints that look just as good as PLA, but with the added strength and durability of ASA. You can't go wrong with this stuff.

I print mostly PETG. The strength and chemical resistance are good and minus the stringing, it usually prints just fine.I decided to give this a try to see if I was missing anything. I printed this in an enclosure and with the bed at 100C. It printed well below 235, but got a bit stringy above. The biggest benefit I felt was the speed I could print at and still get reasonable results vs PETG. Color was very good and bed adhesion was just fine.I gave this 4 stars primarily because my layer-to-layer strength was just OK. I know it is not fair to compare to PETG but all my tests always failed at the layer line on thin walls - which seemed much weaker. The material also seems to yield fairly easily - which could be good for some applications.

Printed well, the red was exactly what I was looking for!

This plastic performs greatIt's not flexibleI had no stringing on my Adv 5m proNo nozzle clogging as of yetIt's very Shiney when printed.Best price around.

This PETG Pro filament in burnt titanium color is by far my favorite. It's strong, I use it to print things that require high heat resistance and high strength. This stuff is better than any PLA on the market because it has great heat resistance.

1st thing I noticed was the poor winding of the filament on the spool that appears to be in a jumble. Have not had a print fail, but just does not look good. 2nd the filament was wet and you could see steam coming off the filament as it came out of the hot end. Layer adhesion is very poor and the print had very poor strength. This is right out of the bag with the filament in a dry box. I do not have a dryer but did put it in the oven for several hours and will see if I get better results

The machine is very well packaged, and showed up two days earlier than expected. Set up was easy, nothing difficult at all. The supplied PLA filament is just enough to do a couple of test prints, and because it's not on a spool, is a royal pain to keep detangled.The test prints using the supplied PLA and built in parts went very well.My issues come down to software. Flashforge documentation recommends the Orca Slice software, which seems to be included on a USB stick along with the configuration file that is supposed to imported once the software is installed.Of course no USB stick, so I had to find the software on the mfg website, however no configuration file to be found, so I can only print with PLA for the time being. Sent an email to Flashforge asking for the config file, but no response as of yet.The nice thing about the Orca Slice is that it does not have to connected to the printer to be able to create a gcode file, which is great as my machine not in a place that can be directly connected to a PC.The reason I mention this is that the other recommended (on Flash Forge's website) slicing option is Flashpoint 5, which seems to be very useful, as long as you can connect directly to the 3d printer.All in all, the printer does a really nice job for the price, and is great for beginners (like me) once you figure out the software issues.

Very happy with this Product and will buy again

Easy to use, the recommended settings were accurate and it printed well right away. It prints better than the poly maker stuff I was using. No lifting no uneven extrusion. As you can see in the pic the parts look great :)I would definitely recommend this ASA and will buy it again. More colours would be nice but I mostly use black and white anyways.

Great filament to print with. I purchased the natural colour. I will be buying this again

uno de mis filamentos preferidos, suelo usar HATCHBOX con muy buenos resultados pero este me sorprendió lo fácil que es imprimir desde una impresora de su misma marca, su software flashprint hace super sencillo de imprimir solo seleccionas el filamento de su marca y tipo y listo !! no tienes que configurar nada mas para que salga perfecta la impresión

Pas de déformation, une couleur noir pailletté, une résistance parfaite, l'ASA n'est pas un filament aussi simple que le PLA pour l'impression, néanmoins celui-ci respectent ses promesses et a un super rendu après traitement à l'acétone :)