DEWALT Drywall Screw Gun, 6.0-Amp (DW255)

What I really like about this "used like new" Dewalt drywall screw gun is that it takes the relatively inexpensive and fairly readily available reduced tip phillips #2 bits which fit a drywall screw dead on perfect. The tip is held in by an internal spring ring that grabs the indents on the bit. The tip wont come out until you pluck it out with needle nose pliers. I received 1 screwgun with bit installed and manual, in a previously opened, slightly roughed up box. The drill took a firm grip and turn to adjust at first as it was stuck. Driving a screw took a firm stab to break it loose to drive a screw the first time. It works perfectly now. Many turns for small incremental adjustments so micro-adjustable. Just remember to use needle nose pliers to pull the bit. No opening the drill. Simply pull it out. It claims 5300 rpm. That seems impossible but it does spin fast. I really wanted the 20 volt version but Dewalt is very proud of that one. I dont mind fighting a cord, its no big deal as there are plenty of outlets. This claims 6 amps so keep that in mind if something big is running on the same circuit. The screw wont turn until you push hard enough to engage the clutch so, you can put your screw on point, true it up, pull the trigger and as soon as you push hard, the screw will drive. .

The DEWALT DW255 drywall screwdriver delivers excellent power and speed, making drywall installation fast and effortless. It’s lightweight, comfortable to handle, and built with DEWALT’s signature durability. A great choice for both professionals and DIY users.

Slightly difficult to adjust depth, but once adjust worked smoothly. Dry walled an entire bathroom

I have 1000 square feet of drywall to finish in my basement. I have been using one of those drill attachments that are used for drywall for the first room. It was taking forever to get anywhere and the screws kept falling out. I didn't want to spend a fortune, but didn't want to spend the rest of my life screwing in drywall screws. One of the biggest problems was the ceiling and the amount of time it took to screw the screws in while holding up the drywall. We picked this up and probably tripled our speed hanging drywall.. This screw gun is fast. The speed that it screws the drywall screws in is way faster than a typical drywall 18V cordelss drill. This also has a nice adjustable setting that allows me to set the screws as deep as I wish. It took a little getting used to, but once set correctly I was flying in no time. This is capable of setting the screws directly below the level of the paper. With the type that works with a standard screwdriver it seemed like it always set the screws too deep. Good price for a good product!

This drywall drill driver has been a fantastic addition to my toolbox. I would not have been able to complete any of my sheetrock work properly without it. The consistancy and speed this tool provides at this price point is outstanding.

I already have one. I do construction of all kinds and do drywall maybe 3 or 4 times a year. My other gun is 7 or 8 years old. I bought this one for back-up and in case I got a job that i wanted two people using screw guns. Haven't had to use this one yet, but I really like my other dewalt DW255 and think it is the best. In my line of work, I spend alot of time in the tool department and reviewing all the brands and with their latest features and I believe this screw gun is the best out of the drywall guns. I recommend it highly to anyone needing to drywall, do-it-yourselfers or professional.

No sirve para nada, ya no le sirve el gatillo Mal producto

I just finished drywalling a new 30 x 40 foot shop that I'll use for woodworking. This drywall screw gun made the project fast and easy. It does what it's supposed to do and let me screw down a 12 foot sheet in under 2 minutes. As with any drywall screw gun, just make sure you hold the back of the tool with the web between your thumb and first finger nestled in the small contour at the back of the tool body and your ring and pinky fingers on the trigger. This lets you apply pressure directly in-line with the screw and leads to much faster, more reliable performance.

Great tool. It makes it quick. With a drill machine it was so difficult. This is soooo helpful

De verdad increíble cómo atornilla. Muy poderoso

Husband loved this. Used it to finish the ceiling, as during covid you had to do everything yourself. It was much easier for him the screw the drywall on the ceiling with this tool rather than with a usual drill. He will use it for all the drywall that has yet to be installed, be it on a ceiling or a wall. Not that heavy when it's for casual use, I guess if its your dayjob you might want something that's lighter with no cord. Great purchase for us.

Me gusto mucho ideal para el trabajo pesado

No pude mover el ajuste de profundidad, será que al estar nuevo hay que hacer alguna maniobra para que se pueda mover o realmente esta pegado, tengo esa duda?