Litever LED Safe Light Kit. Human Motion Sensor Activated. 6 Slim LED Light Bars. Linkable Extendable Plug-in for Gun Safe, Locker, Closet, Showcase, in-Cabinet Under Counter Pantry. Daylight 5000K

Easy to install and adjust for custom placement. As I started my install, I had a safe with full luxury covering and didn't realize that the velcro (hook and loop) supplied with the lighting kit works very well. And even the small wire holders worked as I cut small strips of the supplied velcro, stuck it on the back and stuck them anywhere I wanted. Was able to remove and reset as needed.Again as I started I was having problems as I tried to screw the pieces on then discovered that the supplied velcro works great.Got the extra two light extension kit and my 72" x 36" safe is bright and well lighted and am able to see everything inside. Wish I had used this in my old safe long ago. The motion sensor works well and is nice to have light at first movement. has not gone off as long as I am accessing anything inside.Overall I am very happy with this lighting kit. YMMV.

The tiny little screws to install the lights disappear when you drop them the 500 times that I did.Once you get them in it's a breeze. This light kit is very bright and the motion sensor works as designed.Funny story and a word of warning.I took the time to read the instructions, plug everything together to ensure everything worked prior to install.Then I painstakingly and neatly mounted the lights and secured all the wiring. When I was done it was beautiful. I was so proud of my work.And then I shut the door and went to lock it but the handle would not close all the way.I tried over and over and felt a slight resistance. My mind went to the lights, they must be in the way of the locking bolts.I measured two or three times and couldn't figure out how the lights could get in the way.But since it was the last thing I did, I ripped them out one at a time and tried the lock.All the lights were out still the door would not lock! Man was I upset..If you take a look at the pic I've included you will see the culprit(s). I had moved the Glock case and a couple spare shelves and did not notice they were in the way of the bottom locking mechanism. :-(So back to re-installing and dropping the tiny little screws 500 more times.It is back together and I am happy once again. :-)

I was a little skeptical about this kit, but I have to say that I was pleasantly surprised. This kit contained everything I needed to finish my pantry project. Previously, I had wire shelves that only took up a third of the depth of my panty. I removed all the shelves and installed wood shelving that runs the entire depth. This introduced a new challenge - there simply wasn't enough light getting through to see the items on the shelves. Enter this fantastic little kit. It comes with all the adhesive and mounting brackets you could ask for and is bright enough to make things very easy to see. The included additional extensions were very handy. I did have to splice in some additional length to one of them, but that was no big deal. All-in-all, for the price, I'm thrilled. And the motion sensor works exactly as I'd hoped.The only knock I have against it is that the power brick does run a bit warm. If it fails, it does use a standard barrel connector, so it should be pretty easy to replace with a more robust 12V adapter.

We put 3 of these in my cabinet. Whenever you walk by it lights up. Love that at night. A total nite light, easy to find way to kitchen.This really was a great item....

I'm really happy with this safe lighting. It was a little bit of a chore to install in an aesthetically pleasing manner, but it's a good system and not hard to put together. I tested the motion sensor by placing a video camera inside and confirmed the lights do shut off shortly after I close the safe. The lights are also always on by the time I get the safe door opened. The LEDs are bright and perfectly suited for my "20 gun" safe. I would recommend this product.

Works great in our small pantry

I wasn’t sure what to expect with this kit, but I must say I was pleasantly surprised. It’s a well thought out kit, with extension leads, motion sensor, “y” splitter, and all the hardware to mount it in different ways. It even came with stick on wire holders to hide all the wiring. I bought the 6 pack of lights, when I initially laid it them out in my safe, 3 going up each side, I thought I could use two more across the top. After I lit the lights, it was plenty of light with the 6. In my case, I used the stick on “hook” (Velcro) tape, I used 4 pieces per light, about 2 inches each length, there’s still plenty of tape left over. I like that the backside of lights are 90 degrees, so they fit perfect in the corners, and project the light out well. Buy this kit, you’ll be happy…

I figured another cheap set up for the money, but not the case. This thing comes with several lights, power source, tiny little motion detector and jumper cables to set up any way you want. This was for my gun safe and definitely worth the price.

The media could not be loaded. The lights are perfect for using inside a cabinet with shelving with the V design. The harness, motion sensor and the hardware that comes with this are all excellent quality items. Definitely recommend.

I’ve only had them installed for 4 days… if they last, they’re perfect…great product, great price..👍👍

I used it as an under cabinet light. Motion sensor started to work weirdly from day two. It was working fine when I installed it. From day two onwards it does not turn on when there is a motion and I have to unplug and replug it back to make it work.. but now it won’t turn off automatically. I tried contacting the seller but there is no option to contact them other than return.. I think Amazon should only list products that have support.. I will have to take it down and return it..