MOHERO1.9" Alloy Beadlock Crawler Wheels Rims Set for RC 1/10 Model Crawler SCX10 Pack of 4 (Blue)

These are such a nice add on. They are heavy to help lower center of gravity. The beadlock screws are easy to install cause for each wheel there’s 32. The only problem I had was fitting the cover in the middle The threaded end of axel was too long so just had to grind an 1/8th if an inch off to fit them on. But they are a great looking wheel when it’s all put together. Also there is no hole in the rim so it does hold air pressure and doesn’t let in water which ruins the foam. So happy there isn’t a hole , but that’s more of a preference depending on what kind of driving you do. Definitely recommend

I dont do a lot of reviews. Only when I'm seriously impressed or really disappointed. These wheels commanded a review. I'm happy to say it was due to being seriously impressed. Mostly with the bang for the buck. I dont think someone could even get the same weight in raw aluminum for the same price. And this aluminum came already in the form of a 4 true beadlock wheels. I have to admit I'm still new to this whole RC crawler/ trail / scale... thing so I dont have a lot of comparison history or knowledge but i can tell you these are pretty sweet. They have a good amount of weight to them and being a true headlock is a definite plus. The machining is well done except for the hex nut space in back. The dimensions from flat to flat are great but If I was forced to find a complaint it would be the radius of the hex. The cuts went a bit to far and could have been a bit tighter. It's really a non issue but for the price I didn't expect perfection. It's almost like the wheels were CNC cut with a nicely set up machine then the hex was cut by hand. It's kinda weird. The hardware seems a little soft too, I dont recommend torquing them too much. Overall I do recommend getting these if you're in the market. They look great, work great and the only tiny complaint I had cant even be seen when they're on, so really doesn't bother me. Oh, and they do come with a very nicely machined center hub cover but in my particular vehicle the axel shaft is a bit too long to fit them. I'll probably shave them down in the future but I'm currently removing the wheels so often to gain access to something else, it would just be too much of a pain.

At this price point these are great wheels but don't expect a perfectly finished product. Only 2 small complaints though. First, the center caps are made completely flat on the mounting side and the hole is not big enough for a flanged 4mm nut. 3 solutions I came up with are use standard 4mm lock nuts, Let it rest on the flange and leave a small gap between the wheel and center gap or use a reamer and take away just enough material to allow the flange nut to set flush in the center cap. Pic shows I chose the reamer and there's plenty of room for the nut to fit flush without cutting all the way through the center cap. Second complaint the hex, which is a machined part of the wheel and not removable, sets in very far from the back side of the wheel. These are not a direct fit on the element enduro sendero because the wheel hits the steering linkage just as it starts to go on the stock hex. I am currently waiting for some 10mm wide hex drives to come in to hopefully remedy this issue.Now the good.First thought was to return them. After inspecting them and considering the low price I decided to make them work or throw them away. Overall they seem to be a quality product. Absolutely no scratches, scuffs, dings, chips or anything of that nature anywhere. Every hole and screw is threaded perfectly. Came with all screws needed plus 4 extra. Wheels seem solid , light, but solid. What really sold me on these is that they are full blooded bead lock wheels, the front and back of the tire are held on by the same, interchangeable,12 screw bead lock rings. Finally, I can attest that pro-line class 1 hyrax fit flawlessly and went together fairly easy.

These are some of the best aluminum bead lock wheels for a standard 1/10 RC Crawler I have ever seen. Very real with 16 stainless threaded lock bolts on each side, and then another 8 for the front cover on nut side. I did have an issue with the inside diameter since my SCX10-III has 1 2mm hex nuts, but they axle assembly was too wide and needed to be extended by 8 mm or better to get the correct fit. I chose 12 mm x 15 mm wheel extensions to get best fit, and clearance as well as proper look and stance. The quality is second to none, and the color was perfect for my blue Jeep paint job.

These wheels are horrible very nice looking but screws strip and they don't seal depends on tires you are running

Very nice bead locks for the money. The anodizing could of been a little thicker but for the money it’s good enough. Very nice looking. One thing that is a must if you have a TRX 4 sport, you will need 5 mm minimum extended hexes for them to fit. I don’t know how people are getting away with 3 mm but +5 mm was just about the right amount is space needed to clear the portals. Get the Treal +5 amd you won’t be disappointed.

These are beautiful rims and well built. But unfortunately they wont fit on my stock trx4. I measured the ring and its 1.5 on the inside and it doesnt fit around the portal. But they are nice looking and cheap nonetheless

I bought these wheels/rims for my Axial SCX10 II Jeep. 24 bead lock screws on both sides, took me a while to set up, but overall worked out fine. These rims look great and work well with my Proline Hyrax 1.9 tires. They are a bit heavier than other rims I have (which is a good thing in my opinion). They took a while to get delivered, but arrived fine and are very good.

A lot of screws! But wow are they ever nice looking. Go together super easy. Nice solid chunk of metal

Looks good on one side ,,,, can’t complete because of missing rings

These wheels are a little bit bigger than normal 1.9 wheel. They will stretch your 1.9 tires and no other 1.9 wheel will fit properly after that. I returned mine.

The wheels are ok, except for the fact that the center hole is off center on all 4 of mine.Poor quality. Can't use them.