Adeept5DOF Robotic Arm Kit Compatible with Arduino IDE, Programmable DIY Coding STEM Educational 5 Axis Robot Arm with OLED Display Processing Code and Tutorials - Orange

The servos are bigger and more powerful than the MeArm open source robot. This robot is also easier and more straight forward to build than the MeArm as well. The first axis had a little slop between the servo plate parts A03 and A04, this was fixed by adding a piece of tape around the edge of part A03 to reduce the gap between. The quality of the parts is very high, they are several extra parts if you break any, I did not need any but still nice to have just in case. The first driver board I received was defective but after a few trouble shooting messages through the amazon messaging system a replacement board arrived and worked perfectly. The OLED display is bright and easy to read. The small text size is very tiny but it is easy to change through the Arduino IDE. Overall happy with the little robot.

En general bien, lo malo fue que uno de los servomotores no funciona. ¿Cómo le hago para que me manden ese servo?

This robot was a birthday gift for my son with the intention of taking it to the county fair. Less than two weeks before the fair, two plastic pieces were broken (it is unclear to me how but not fault of vendor/manufacturer). I contacted customer service and they said they would send the parts. Since the parts would come from China, they wouldn’t arrive fast enough so they offered to send a kit from an Amazon warehouse and we agreed on price. They arrived in plenty of time to repair the robot. The build was not complicated but it took some finesse with holding parts and bolts/nuts. We have yet to figure out the programming.

Foi uma oferta. A pessoa adorou. Faz o proposto.

This is my first Arduino kit as the starter kit I ordered still has not arrived. While watching videos on what projects can be done on Arduino starter kit. Saw this product with next day delivery and bought it..The Good:- A single Arduino Board which can control 6 servo motors, an OLED screen and power supply for the motors. There is a Bluetooth and Wifi option but not sure what is required to use those.- Tutorial pdf on how to control the board using Arduino IDE, Python and a few others tools but it is not detailed, just enough to demonstrate it can be done.- There are extra part for every screw, nut, or bolt for assembling the kit.- Although the Robot Arm and the Potentiometer on-board only have 5 Servo motors, it maybe possible to control a 6DOF Robot Arm via software coding.The Bad:- The arm is fragile and can break easily. Tiny screws and nuts and took 6 hours to build and another few more hours to adjust as I skipped some steps shown on the video. The motor should be 'primed?' before assembly to set to 'default' position.- The PDF or the Video may not match the kit, so I have to watch both side by side during assembly.- The 18650 battery maybe a problem to those who does not have it yet, not only you need to buy this battery, may also need a charger.- The CH340 chip has some extra steps every time Arduino IDE is launch as the driver seems to lock some Arduino files.- The finish product sketch for the kit is not available on-line. Once a tutorial sketch is uploaded, there is no way to restore the original sketch and must quickly learn programming to enable the features. Edit: The default sketch maybe is the Learning sketch available on the tutorial.- The Servo1 on the base under the ball bearing was difficult to secure with the servo screw as it is blocked by Servo2. At first, have to use Adeept extra screw which was longer and can secure it but later decided to remove the Servo 2 with the Arm and use the shorter servo screw for Servo1.Overall, this product is good enough to learn Arduino/Python programming for the servos and the OLED display. Not sure yet what can be done for the bluetooth and wifi options if it can be enabled.