Monitor Wall Mount Fits 17-32 Inch Flat/Curved Computer Screens, Single Arm Holds up to 19.8lbs, Height Adjustable Gas Spring Wall Monitor Stand Tilt, VESA Mount 75x75/100x100

This is a quality and easy to use monitor arm. It works just as advertised. It is easy to move and adjust. You have to be sure that if you are installing it into a wall stud you know exactly where the "edges" are. Since the upper two mounting holes are basically side by side it is easy to miscalculate and not get one of the bolts solidly into the stud. I had issues with this. Other wise a great value for the price. I would buy this again.

I purchased a 32" Predator computer monitor and already had a wall hanger only to find out that the screws were not the same size. Was not really sure what to replace it with and after reading the reviews bought this one. WOW, what a difference and it has gas cartridge which helps it lowers and rise with ease. You will not be disappointed. If you are unsure which one to purchase, reach out to the company.

Using this for a 32" monitor and it works well.

Works fine, good range of motion, adjustable spring tension. I use it 5o mount another brands laptop tray. The parts managed up just fine.

Assembly was no issue at all, super simple. Adjusting the tension took a bit, but once I got it dialed in it seemed to work just fine.The mounting plate was no hassle as well, how ever,,, the mounting plate to the arm was not a good fit, it is loose when I move the screen around, hopefully I can tighten it up with shimms or something.

Buena calidad de los materiales y fácil de instalar

I purchased this for a tool box install. I mounted it on the side of a Mac tools Macsimizer hutch to hold a 27" monitor. Getting rid of the monitor base created a lot of room and it's nice to have the ability to move the monitor around.

The media could not be loaded. I was looking to reduce stuff on my desk and saw this wall mount. The way my desk is built I couldn’t get a desk mounted one but needed something that swiveled so it could be wall mounted.This mount is perfect! I can’t believe I waited so long! It was super easy to mount - me + stud finder+ cordless drill +20 minutes = success

This ErgoFocus Monitor Wall Mount is a solid choice for anyone looking to optimize their workspace. It's a heavy-duty and durable mount that's competitively priced, especially compared to department store options.Setting it up was straightforward, with the arm arriving fully assembled and ready to be fixed to the wall using the included screws. The mount is quite hefty, weighing around 3 lbs, so it's crucial to consider the combined weight of the arm and your monitor when choosing where to attach it. While it comes with two sizes of VESA screws, unfortunately, neither fit my 32-inch Samsung all-in-one monitor/TV, so I had to use some spare screws I had lying around.In use, the mount holds my monitor securely and offers a good range of adjustments, freeing up desk space and making my workspace more ergonomic. Just make sure you have a sturdy wall or studs to attach it to, given the weight. Overall, it's a great value for the price, and I'd recommend it to anyone looking to enhance their workspace setup.

I used this to mount my LG Ultrawide monitor. It requires a few tools to install, but it is relatively straightforward if you have them or can borrow them.Basically, you’ll need a stud finder and a drill for making pilot holes. I think everything else is contained in the package. If you need to get a stud finder, look at the ones that tell you not only when you are at the center of a stud but also when you are over electrical components.Installing it is definitely a 2 person job. The unit is heavy, so you’ll need some extra muscle to hold things in place while screwing, etc.Now that it’s mounted, it seems to work quite well. It is very solid, and it is easy to move it around to position it just right. The default tension worked for my monitor, so I didn’t even have to mess with any of the fine details.A desk clamp monitor stand would be more convenient, but my current computer table has an annoying metal support bar that blocks any sort of clamping mechanism. So this wall-mounted type was perfect for my situation.I recommend this if you need a solid wall-mounted monitor stand for a single monitor.

This is a pretty good computer monitor wall mount. It feels heavy, durable and high-quality and I found the price to be competitive with similar products found online, and much cheaper than what you would find at a department store. Some monitor mounts can be VERY expensive and overpriced.Setup is simple. The monitor arm itself is one fully assembled piece. You attach the VESA mount bracket to the monitor arm by sliding it into place and locking with a screw and fix the arm to your preferred location by screwing it to a wall with the included screws. This monitor arm itself is fairly hefty at approximately 3 lbs. Take into consideration the weight of your monitor itself as well as the arm when attaching to your wall of choice. If you have wall studs or cement, this will hold great, but if you plan on attaching to drywall (which I would not recommend), I would strongly suggest using the included drywall anchors.The VESA screws are included in two different sizes, long and short. Sadly, both were too narrow to properly fit my monitor. Luckily I had some older VESA screws laying around that I was able to use. I have seen other monitor mounts on the market that come with a wide variety of sizes for the mounting screws, so I was sad to see this only came with two sizes.I am using this monitor arm with my 24” ViewSonic monitor. It holds the monitor well and provides an adequate amount of adjustment for my needs. It holds strong and stays in place properly and frees up a lot of desk space.For the price, you can’t go wrong, but ensure you have wall studs or a sturdy base to attach this to, as it can become fairly heavy once you have your monitor attached.

I have this set-up in my living for the family PC as it clears up the limited desk space since it doesn’t rest on a desk surface or riser/stand to bring it up to eye level. The ergonomic, adjustable gas spring mount installs easily, and you can opt to try to mount it to a wall stud or use heavy-duty wall anchors, like toggle bolts, to ensure it’s securely mounted, especially if you have a heavy/expensive screen! I used this to mount a flat screen 27” PC monitor (not curved, sadly) – installation was simple and it looks great!You can adjust the angle of the monitor super easily to suit your seated position which is great for a family of 4, since you can angle it up, down, or side to side, to ensure a proper viewing angle no matter who is using it at the time!

The mounting arm is a really well-built, flexible orientation system. It is very robust and can handle the weight of up to 32" ( 30" monitor in my case) monitor comfortably.Pros:*Several degrees of freedom allows tilt, rotate, lateral displacement, extension, etc to practically any position to the centre/right/left which adapts to different users.*Small wall footprint on a wallstud*Can handle considerable weight*Smooth motion and pneumatic (gas) spring counterweight system.* Includes diverse hardware and instructions for most installationsCons: Solid construction and weight capacity means that the unit is heavy with monitor. Absolutely MUST anchor to stud or solid wall.Recommendation: A quality product and you get what you pay for. I recommend it!