⚡ Power Precision Meets Pro Performance — Stay Ahead, Stay Powered!
The NICE-POWER DC Power Supply is a professional-grade, variable 30V/10A bench power supply featuring a high-precision 4-digit LED display with 0.01V/0.001A resolution. It offers safe, efficient operation with a one-touch output switch, multiple built-in protections, and an intelligent cooling system. Compact and portable, it includes a 5V/2A USB port for device charging, making it ideal for electronics repair, lab work, and DIY projects.
S**.
Works well at a great price
I bought this to help balance and charge my 2016 Prius C-type battery modules (not for the faint of heart-- make sure you do your homework before attempting this), and I have to say this power supply exceeded my expectations. It has a constant current mode and a constant voltage mode, but the interesting and convenient feature is that it switches automatically between these two modes according to the load you attach. If you set the max current to 2 amps, and the max voltage to 8.0 volts, it will deliver 2 amps while the battery voltage is at 7.7, 7.8, 7.9 and then when it reaches 8.0 volts it automatically switches to constant voltage mode and the current drops. It doesn't go to zero at first, because the battery was at 8.0v in part because of internal resistance, so the thing gently lowers the current and prevents the voltage from exceeding 8 volts. This was extremely convenient, as it allowed me to leave it unattended for periods of time without worry I would damage the modules by over charging. There are purpose-built battery chargers that will also do such things, with some added benefits of measuring the battery capacity in the process, but honestly I wasn't really interested in doing a deep exploration of every module, and I wanted to balance them all at once. Even quite expensive battery chargers can't produce the high current you need for large parallel banks of EV modules, so this ended up beating out the hobbyist battery charges so badly I returned those and I'm keeping this.The way I used it was to switch the whole battery from series to parallel by reversing the orientation of every other module (again-- you have to know what you are doing to try this, I have a degree in EE), and then I ran a 14 AWG wire connecting all the negatives together, and another connecting all the positives together. I just hooked up the power supply to the bank all at once. I set it to a max voltage of 8.0v and a max current of 4 amps (which divided by 20 battery modules is way below the 0.1C current standard), and then I could walk away and let the device do its thing. If you go to the trouble to check the output voltage delivered with the value that the unit displays on the screen, be sure to measure the voltage at the terminals-- as the voltage drop at 4A in the leads is significant. I found the readout to be decently accurate (though its only 2 decimal places past the decimal point, so not an ultra-high precision voltmeter by any means). I really like it. When its working hard, the fan turns on to prevent overheating, so it has a little personality to it to boot.It is a sign of the times that I was able to buy a $35 module, and a $30 power supply and then repair a hybrid battery that the repair shop wanted $3600 to fix. Today I have a perfectly working Prius C-type, a really sweet power supply, and $3535 dollars in my pocket. SMH.
A**R
Seems to work perfectly - amazing value
I use this for powering my telescope, computer, and camera equipment while observing. I would have preferred red displays - I took the unit apart to add red filters to the display and had a chance to inspect it. Solder joints are very clean and the whole thing is intelligently laid out. Construction is very solid. There is a 4-pin socket with the letters RX and TX marked - probably a interface for calibration.
E**D
It works!
It is working for my application, adjustments are a little unprecise.
A**H
Great hobbiest tool
I've never had one of these before, and the user manual wasn't a lot of help, but Youtube had several excellent videos. I'm using this in a project where I have a lot of LED's, and this lets me test circuits without over-driving them. I'm also using it to determine the correct voltage and current for no-name and salvaged led's. The leads are sturdy enough, and the connect posts handy screw-type. The panel display is large enough for my old eyes to read, and the nobs work smoothly adjusting voltage and current. One thing to watch out for - the nobs to NOT align with the display - so the the nob directly RIGHT of the current setting is actually the fine voltage control. It is NOT bad design, the positions are good for a compact unit. and once you have the muscle memory, its no problem. I have found it to be very stable and it matches my multi-meter readings, so I'm going to say its accurate. For the price it is AMAZING! I should have gotten one of these years ago...
C**T
Works good
Works good other than the adjustment knots are kinda finicky
C**R
Awesome price
Awesome price and is powerful enough to power my high amp motors
S**M
Almost burnt my house down
This thing almost burnt my house down. I went to sleep last night and heard a loud pop. I thought something just fell so I put my coat on to check things out, but just before I left the room, I heard two more loud pops. So I rushed to the kitchen to find my chair on fire (the power supply was on the chair plugged into the wall, but the positive and negative leads were disconnected from the unit, so it was not outputting power to anything). Thankfully the chair was really close to the front door, so I threw the chair outside and was able to extinguish it, but now the house smells like a cocktail of burnt chemicals and there's smoke stains on my walls and ceiling. I got several burns on my left hand and both feet throwing the chair outside.Since I heard the loud pop and saw the chair on fire, I'm going to assume that the fuse (if there was one) failed, making a critical component within the machine blow and then send a spark flying out onto the chair. This would tell me that the build quality for my unit was absolutely terrible. Components would have had to have been connected to the board really poorly or the components themselves severely shorted or poorly constructed. Probably both honestly. I only used it like 5 times since I bought it. had my warranty card tucked half way in the top rear gap of the chassis, so that's gone now. I never expected my unit to just up and explode on me and catch the surroundings on fire.
D**G
Nice power supply, I’m happy.
Runs quiet, accuracy seems exceptional, and it’s easy to use. I really like this power supply for testing or troubleshooting, it’s making my life easier.
Trustpilot
1 month ago
3 weeks ago