15 Pcs Precision Tip Applicator Bottles –15 Translucent Bottles and 15 Colored Tips, Come with 5 Pcs Mini Funnel for DIY Quilling Craft, Acrylic Painting, 30ml /1 Ounce

I wanted to glue up a 3D printed ABS plastic project. There are probably many glues out there that would work fine on ABS plastic. Shown in the photo is the glue that I wanted to use, purchased through Amazon. This glue is fairly "runny" but not as thin as super glue. The glue nozzle if fairly wide which I thought would put out too much glue for my project.So, I ordered these applicator bottles. Initially, I poured only a little of the glue into a bottle as I didn't know how the bottle plastic would react with the glue. The small applicator nozzle was perfect for dispensing the glue on my project. The glue I was using was fairly fast setting but not instantaneous like super glue.I glued several parts together and then waited a couple of minutes before proceeding. The small applicator nozzle was now "clogged" so I had to switch to a new cap and then finished my glue up more quickly this time. The caps may prove to be "expendable", but, maybe they could be "cleaned" if I did it soon enough.I thought I could use a very small numbered drill bit but I didn't have one. I then used a very small stiff "wire" that came with my 3D printer and was used for clearing 3D printer nozzle clogs. This worked fine. Anything you can put down the cap nozzle would also work. I cleaned the cap from both the top and bottom and ensured that when the cap was back on the bottle, it did not tip over. The remaining glue did not harden in the applicator bottle.The next day, I was pleased to find that the cap nozzle worked just fine again. These applicators should work for many fluid applications although you may have to clean the nozzles and bottles out between uses. Some thicker fluids may not work with the small nozzle opening. Overall, I was very pleased with these applicators and the price.

Works great. You have to learn the quirks of the paint your using like mine dries quickly and will clog the tip but I take a straight pin and it clears up no problem. If paint runs out too fast its likely because of too much pressure in the bottle because air doesn't enter the bottle through the paint filled tips and it can't vent. So unscrew it and let some air in so you don't mess up what your working on. Do this occasionally and you will be fine. We use ours on leather stamping and it works great, much better than a paint brush!

Work great!Does very fine lines of glue.I put Tacky Glue in mine.Ive only used 1 tho!haha!Dont need that many,but I’m sure I could use rest for diff glues,paint or whatever.Oh,the bottles all have rubber lid thing that’s attached,which Is really nice!My glue hasn’t dried up or clogged...

I use these for holding alcohol, blending solution, and alcohol inks and boy are they fantastic. With alcohol inks, a little goes a very long way and often even a drop from a standard bottle can be too much. These solve that problem while providing good airtight storage. I love that I can't lose the attached silicone tip covers.If you use the Jacquard Pinata inks and do detailed work at all, this is a fantastic addition to your toolbox (the Jacquard inks are fantastic, but the dropper creates large droplets). If you use Tim Holtz inks, these are still an upgrade (their applicator is small, but the lids are detached and it can be easy to put the wrong lid on a bottle).If you do any sort of alcohol ink work, regardless of brand, these can significantly improve your application of alcohol/thinning medium.

Came on time. i use these for alcohol ink painting. they are great for applying smaller drops of alcohol , and for diluting the inks and storing them . they have a great cap for the needle which is attached to the bottle, so the inks don’t dry up, Nor do they spill if bottle falls over. I would guess the needle gauge is either 22 or 23 so you get a smaller drop then from the alcohol ink bottles. these really work well.

I liked the “idea” of the usefulness, but haven’t been able to use it because I can’t get enough paint in it. It wasn’t that difficult to wash the little paint out of the bottom of the bottle. I’m still trying to figure it out.

Bought these for dot painting on ceramics. I'm going to say I'm absolutely pleased. I like the small size that is comfortable for my hand. Easy to squeeze and control. Love the little funnels it came with but does take time for thicker paint to flow. Have not had any problems with clogging but a pin can clear that out quickly. Only tip is to clean the funnels as soon as you use them. Great value. I'm ordering another set!

They were a good quality and easy to use. They gave me controlled and precise application of firearm solvents and oils. Even used one for my pneumatic tools. I keep them near my workbench so they are close at hand, they keep any oily messes to a minimum. The finals that are included make them very easy to fill.