EZDIY-FAB Shield ARGB M.2 SSD Heatsink with Build-in 20mm PWM Fan, Premium Aluminum Design,5V 3-Pin ARGB Sync, High-Performance SSD Cooler for M.2 2280-White-1 Pack

I'm absolutely blown away with the performance of this little NVME cooler. The heat-sink on this thing is MASSIVE in comparison to an actual nvme size and the two thermal strips that go above and below the nvme must do a lot of work in terms of cooling. The heat-sink and cooler itself is surprisingly heavy and the RGB is beautiful. It comes with a tiny screwdriver and installing it is a breeze. Once you place the thermal strips on and unscrew the heatsink, you place the NVME in between the bottom slate and the heat-sink and close it.After that, the nvme becomes one with the heat-sink/cooler and you just install it like normal. The nvme is daisy chain compatible and the fan plugs into any fan slot on the motherboard. I cannot hear the fan at all no matter how close I get to it. When everything is done, the results speak for themselves. 16C drop... unreal. For the price and the performance, it seems like a no brainer. I'd imagine even without the fan, this would drop the temperature like crazy due to the massive heat-sink. The best part of all, it's aesthetically beautiful. It literally looks like a mini-GPU. One of the best computer accessories I've ever purchased.

Works great please read instructions before installing you do need to stick the thermal stickers on your ssd before installing but is super easy they are provided and keep my ssd temperature under 37celcius

I started buying M.2 SSD heatsinks as soon as I switched to that form factor and I saw how HOT! the SSDs ran. After trying more than a dozen different heatsink types, with very little success, I finally found two that worked well, the T-FORCE DARK AirFlow I (no longer available) and the M.2-THREE M2 (sometimes called JIUSHARK). They both use fans, 40mm or 60mm. The M.2-THREE M2 is pretty tall.I usually buy high quality motherboards but their heatsinks do not perform well with high-end SSDs.This EZDIY-FAB SSD Heatsink is the best so far and it is relatively small. I always adjust the fan curve in BIOS to get the quietest operation, and they still provide the best cooling. I've replaced all my systems heatsinks with these units on both my computers.

Works and looks awesome in my computer. Be careful buying if your m.2 slot is really close to your GPU slot. I had to file down the lock release just a bit to get it to fit

Extremely easy to sandwhich the thermal pads onto the nvme before tightening the beautiful shroud onto your SSD, glows and operates beautifully. Adds more vibrance to your motherboard rather a traditional or OEM heatsink

My m.2 was starting to get a little hotter than I would like since stuffing in a 5080 in my case. This little fan works great. Drops the temps a few degrees. Plug it into your rgb controller or use the splitter it comes with to tap into an existing rgb plug you already have and it syncs right up.

This little thing is awesome. Keeps the ssd cool and looks good in the process. Works great out of the box and is argb addressable.

Great product that works perfectly. Keeps my gen 4 M.2 around 10°c cooler than my other M.2 that has a normal heatsink.