Marsauto 9006/HB4 Bulbs with Fan, 16000LM 6500K Xenon White, M2 Series Fog Light Bulb Kit

I liked how perfectly they fit, and how nice and bright and blue they are. So far no flickering or errors. When installing they did blow the second fuse, The BMW Z3 1997 Roadster (my current project and future art car when running well) has 2 fuses for the headlights so it had me a bit freaked out as I checked the first but not the second and had no headlights.They are putting out significantly more light than my brights, the yellow ones on the left in the picture. WIll do those after everything else on this project makes it truly road worthy again and they might be needed on the open country roads. Around Dallas fancy brights are basically worthless as you are never alone on the roads. Ever.These should significantly enhance my safety as far as being visible and my seeing at night as well. Now I just have to make sure they are adjusted correctly so I don't blind people.

I wanted to change to a brighter LED bulb, and these fit my vehicle. So I took the chance to get these and see how hard it would be to to install them.Well, I could not be happier. It was a simple as removing the old bulbs, and these just plugged right back in and connected to the existing plug ends. No wire cutting or splicing, and simple to do. Really simple to do. Even came with a sticky tape to keep the little transistor box and wires out of the way.They are bright and work super well! Love them. Have had them in about a month now and no issues. I liked them so much I got the ones that fit my other two vehicles also and have installed them in all three of my vehicles!NOTE! MAKE SURE you get the ones for your make model and year of vehicle!

While these are bright as hell, I can finally see the road at night, and seem to work just fine so far (a single day), they do not make a proper seal in the headlight assembly and fit loosely in the socket, so my lenses have already started fogging up on the inside. What a damn shame.2005 Honda Civic EX CoupeEdit: I've put together my own seal solution for these LED bulbs, and since then, have had no issue a loose fit or internal fogging. Just be aware that if you buy these, they most likely will feel loose once you tighten them into the socket, which will cause moisture buildup inside of your headlights. The seals they ship with are just simply not big enough, and after comparing to proper incandescent bulbs, the LED housing itself is even smaller than the proper 9006 bulbs, so using the seals from your old incandescent's will not work either.I ended up taking seals from one of my unused e-cigarette sub-ohm tanks and using those to get a tight seal between the bulb and the socket, and now it's no longer loose. Picture of my new seals and the original LED seal included for reference.

Installed these on my wife's 2008 PT Cruiser for Christmas. Each of them flash on and off at odd intervals when the car is running. It doesn't seem to do it when the car is off. I don't know if a CANBus decoder will fix the problem or if I should return them. So, if you have a PT Cruiser expect this to happen.[edit] Unlike another reviewer, they didn't give me a CANBus decoder for free but I added one anyway. At first the bulbs wouldn't even turn on, but the company I bought them from suggested I hook them up in reverse polarity. That worked perfectly.My summer car is a 2005 PT Cruiser Conv. I added a different brand LED light to that and didn't need a CANBus decoder.

The led light is best for headlights that have a projector installed in the headlight, therefore focusing the light even better. It also comes with a downside - regular reflector lights don't get a focused beam, making it have a bright straight line, which downgrades the vision. BUY FOR PROJECTOR, DO NOT BUY FOR reflectors. Better option is HID. (Car that was tested on - 2005 Honda Accord)

I bought these for a 2001 GMC Sonoma.I am getting old and it was starting to get hard to see the road at night. I could see fine on high beams but struggled on low beams. I had been running Halogen bulbs but switched to LED's in all my other cars.I never thought these would fit but by taking off the mounting hardware behind the head light (4 screws) these dropped right in. Reinstalled the hardware and put the headlights back in and now it is daytime at midnight. At least a 100% improvement.These fit, seem to be well made, and really work.

Low Beam LED Lightbulbs for my 07 Civic SiEasy to install. It has a built-in fan so you can hear it when the lights are on. The light is very bright and white which is exactly what I need.

Is the second time that buy a marsauto brand the first was for 06 Nissan Sentra and the second time was for 06 Honda Civic and on the both cases the headlights fit perfectly on the cars, on the case of the civic one was defective but as soon contact to the seller they do quick service and sent me the replacement in less the week. Thanks to Cathy and Vicky of customer service for your help!

I've had them for almost 2 years. Very bright.I don't have auto lights, so when my day running lights are on, these lightbulbs flicker, so you may need a module.I just keep my lights on all the time.Fan is a little loud. I would still recommend this if you just want brighter headlights.

Brighter

There good

Fait la job, mais pas aussi bonne qualité que je ceoyais

Very good. Easy to install and the bulbs is better than my old bulbs a lot. More safe on driving.