JoyCon Replacement 4 Pack, Analog Thumb Stick for Switch Joy-Con Controller & Switch Lite, Left/Right Analog Joystick with Thumbstick Grips & Screws

Worked great and didn't drift at all since I changed them

Works like a charm and feels more or less like the original. Tested it next to one with an original joystick, and if anything, the new one is a bit springier and more responsive (could just be because it's new). I've broken and replaced my fair share of joysticks in these things, and I even went back to an older one I put a new joystick in a while ago and replaced that one with an extra one from this set because it was much higher quality than the older replacement. The caps are a nice bonus. Install about as easily as any other joystick replacements you'll find.Pictured: One with a new joystick next to one with an original. Which is which? Only the wear gives it away. 😉

The media could not be loaded. Jaoystii joycon drift replacement worked great for me, first try no issues at all. Been a few months since I replaced the top left joycon in my blue controller (viewing the included images and video), still works flawlessly.I only used one joycon of the four, and did not use any of the screws. For the reviewer that mention the joycon is stiffer I would agree, but I have newer controllers and they are also stiffer, it is due to being new and not used and broken in. Regardless you don’t notice it, it does not affect the movement. As you can see from the images, the tops are identical to my switch, but the bottoms have a different stamp some extra holes and the color of the data cable is different. None of that makes a difference.The drift became so bad playing Tears Of The Kingdom, I decided to try this. I could no longer clean it or add backing to the joycon or bend the back in. With the new joycon I can climb a tree or cliff and no longer walk off when not touching the joycon. For me it works great! Very happy with this cheap but very effective replacement for $13 bucks.Only recommendation I would have for the vendor is a package of two controllers AND the plastic controller housing. I have unscrewed the plastic housing multiple times through the years of cleaning the joycon and adding backing to it, in order to stop the drift, I partially cracked one. Still works fine but one screw does not hold the housing together as tight as the others. Just a suggestion.Great not having drift in the joycon.

I bought these to replace a broken drift knob. They are an exact fit and work well. Much cheaper than replacing the entire joycon!! The installation wasn’t too bad. The only issue I ran into was the wire ribbon on the new knob wouldn’t fit all the way into the connector on the computer board. I tried several knobs from the replacement pack but all were the same. I pushed the wire ribbon in as much as I can and fastened the lock on the connector. Regardless…the new knob works fine.

These thumbstick replacements are a near match for the originals. It feels like they're a little stiffer (that could just be due to wear on the originals), and the throw distance is a little bit shorter. Neither of these significantly impact gameplay. Note that installation is probably a medium difficulty level for someone that doesn't regularly repair electronics. These replacements do not come with tools so you need to either already have them or buy them separately. Being that I do a lot of console modding and repairs, replacing these was pretty easy, and I'm happy to have fully responsive thumbsticks that support full range of motion. I had done the various "repairs" recommended on the internet fororiginal thumbsticks that are drifting, and I'm frankly amazed at how bad they had gotten, now that I have these to compare them to. I definitely recommend this product.

My switch is old. And not only did I get the dreaded left joycon drift, I got the rarer right joycon drift. This is a 4-pack of thumbsticks, so if it happens again, I've already got replacements.The thumbsticks are very basic, just like originals at a fraction of the cost. It's a task to replace them if you don't have the right tools. I did, and these popped right in. The ribbon cable is a little longer than the originals, so it took a little to get everything repacked into the controller, but they work great. If I get a year or two out of them I'll be happy.I did have to look for a video to help me figure out how to get the joycons apart and replace the thumbsticks, the instructions (or lack thereof) didn't help, but there's more than enough resources online. If you have the correct tools (not included), and you have access to videos, you'll be fine.Overall, they're the right item for the right price.

I got a used Switch, and half of the analogs had drift or were very rough to use.These new analogs were not very difficult to install using iFixit instructions. They really do look and feel exactly like the originals. I will probably end up buying more of these when the rest of my analogs inevitably fail.The rubber caps are a nice touch but I don't really use them.The tools are nice enough if you don't have your own. Many people have complained about them stripping the screws, but I had no trouble whatsoever. Take your time and apply enough pressure that the bit doesn't slip.

Work like a charm for my switch joycon