VEVORPower Benchtop Planers, Three-Blade, Two Speed, 13" Width Worktable Thickness Planer with Extended Infeeding Table, Low Noise for both hard & soft wood material removal

This is my first planer. I never had nor used one before now. I read some reviews that complained about the dust collection effectiveness and went ahead to hook up my shop vac to the planer port. So far I am amazed at the amount of wood dust and chips my vac collects! I have a Ridgid Vac that is probably at least 5 or 6 years old. The meager amount of wood that escapes the vac is almost nil.And most importantly, this planer is the bomb. It makes mince meat out of anything I put through it. I turned some older boards sitting in my garage from disasters to something even my wife was impressed with. I recommend this planer to any home hobbyist who will use it for light to moderate work. It doesn't have many miles on it yet but it will have soon. And for the money I think it would be hard to beat.

I just got mine today. I turned the travel speed down since it's a two speed and then I take off just a little at a time and I don't have a problem with chip collection. I also do not like that the hose port in the back is kinda in the way but it is doable. I am making a flip top cart for the planer to flip down and store under bench however the extension tables do not fold up all the way due to power switch in the front is actually in the way! I had to modify a flexible hose to fit the port and used Eternabond tape to hold slightly loose hose in place and so the rear table also will not fold up. So my remedy is to remove both extension tables. I am currently only running 12" X 6" so for now no big deal. MY wood shop is small and I have to store it under workbench when not in use. I should mention that I do not like that it does not have a limit stop for minimum thickness. I am cutting 3/4" boards down to a final thickness of 1/2" and all boards need to be 1/2" for flat glue up. I put a little piece of wood under the left front corner of the bed and taped it in place and it is working. I can't imagine having to read the gauge on every run and I have a few hundred to run. When I turn the adjustment down all the way to where it hits my Jerry rigged stop block the gauge on the right front shows 14mm which is 0.551181 inch and now works for my project and all pieces are the same identical thickness. Update: I finished my flip top cart for the planer. I did attach the in feed table and I use a bungee cord to hold table in the up position when folding the flip top down. I also had a slight bend and loose edge on the main in-feed main chrome table. I drilled small holes and attached small screws to the front side lip of the chrome metal piece. I wish that the vacuum port was 2 1/2" but it is not and had to piece it together with smaller adapters. I find some of my other tools also do not use 2 1/2" so I was not surprised.

Does a great job of planing I’ve only done a little bit of work with this unit but the process was good and smooth

What I got to say about this item I have two of them one of us works great the other one that I bought he has three blades so after I use it for the first time the rollers stop pushing now withoutSo I took it up to myself to open them and see what's going on I still have the warranty on it but like I'm patients that I have and some items. I had to open itIn the meantime I'm writing emailing to the company what are the few the day or so I get respondA I explained what's going on then going through back and forth th customer service find out that is the gearbox so I did what they asked me I open the gearbox said I found which gear it was come loose so after back and forth and consistently stay in the problem that I have the company came through me sending a small video and I work at it explain to them what is going on they came through and send me the part no free of chargeNow would like to put it back together I don't think I should have a problem with it but what is stress and this message it is a good product for the money but s*** happens but the company stood behind they they said to be a new part and I am going to repair it would like to be a I will give this five stars head overall performance because I have another one I also give five stars for the customer service

I bought the planer with high hopes based on reviews, but was very disappointed in the first 15 minutes of use.I started out with a 6" wide piece of maple that was 48" long. The first 3 cuts on low speed worked well, but each subsequent cut at a 1/4 turn would trip the breaker 2/3rds of the way through.My next board was an 8" wide 8' long piece of yellow pine on the faster speed. After the first 2 cuts and breaker trips I switched to the slow speed. I still couldn't get the full length of the board through the machine. I used the machine a total of 15 minutes before I packaged it back up for a return.I contacted vevor for a warranty replacement, but it took 4 days to get an email response from them, so I returned the planer back to Amazon.The new machine performed much poorer than the used 5 year old 2 blade planer it replaced.I

Absolutely! You should only cut about a hair thickness at a time. Cutter is belt driven part# 6PJ348I thought after cutting 100 ish boards it quit working as I had to push the board threw so I bought a craftsman dual planer lmfao after just 10 boards "hickory " it went dull and the thickness setter vibration kept changing the thickness and the final cut sucked! Vevor 3 blade is a smooth beautiful cut! I did buy some new blades Foxbc so far cuts beautiful. And yes changing the blades is a pain in the butt! But, it's worth it!

Funciona pero le falta power