Pressure Washer Nozzle Guard, Power Washer Nozzle Tips with Protector Holder, 5 Pressure Washing Tips with 1/4" Quick Connect, Orifice 3.0

Far superior than the standard 1/4 inch quick connect attachments so far I have used the white 40 and green 25 degree attachment when pressure washing the car can’t really comment on accuracy of them but they seem okay, have plenty of pressure going through them only thing that I could complain about is that they are not rubberised on the cone more of a plasticy feel so make sure you check that they are connected properly with both hearing a positive click and pointing away from your vehicle and then a short 5-10 second burst and if they pop off the end of your lance and hit the ground trust me it’s a lot better that then hitting your vehicle!ProsPlenty of decent attachments for a low cost vs the pro versionsEasy enough to connectSeems to be reasonably accurate enoughConsNot rubberised on the ends of attachmentsNot very easy to see the angle degree, however if using for a car wash remember Green / White YES Orange AT OWN RISK Red NO!Overall a good little set with a few minor negatives that whilst not as important to the overall quality of products for price but if put right would make them even more attractive to purchase for us Sunday Warriors who are out 7am washing the car

I bought these back in October they are a very well built nozzles for the price however the gaurd isn't soft rubber its more plastic like than rubber, I only recently got a presure gauge for my hose to check which orifice size nozzles were best for my machine, when checking these 030 orifice set i found out that only the 40° nozzle is a 030 it came in at 1550psi but the 25° nozzle came in at only 950psi then the 15° nozzle came in at only 450psi which should not be happening, in theory all 3 the 40° the 25° and the 15° should all give the same presure reading, however in the real world normally ye get a tiny climb with the presure needle with the narrower nozzles the 25° & 15° but only a very slight climb hardly noticeable certainly not hundreds of psi less, from what I can make out they gave me a 030 orifice 40° nozzle but the 25° nozzle is a 035 orifice and the 15° nozzle is a 040 orifice i known this because iv tested them compared to other brand sets of 035 & 040 orifice nozzles that I have that are giving the readings they should be, so thats why I deducted 2 stars they are well built but the orifice sizes are not accurate throughout the set which could cause damage to people's presure washers by have the wrong size labeled on the nozzle. Just to add i did not test the red 0° nozzle

These 1/4 inch pressure washer nozzles fit perfectly in my MJJC short swivel trigger gun and have rubber guards to prevent accidentally damaging car paintwork. There are 5 nozzles; 0, 15, 25 & 40 degree jets and a soap soaker nozzle (doesn't have the guard). I use these regularly to wash our cars and have had no issues at all.

I do a lot of car detailing and having pressure washer nozzles with different spray patterns is really useful. you have a wide flat spray which would be great for pre-rinse to get good coverage on the car, down to a 0 degree jet nozzle which would be good for those stubborn brake dust on your wheels. They are good for patios and driveways too, giving you different levels of intensity when trying to remove dirt from stone and anything else really. If you have a pressure washer then a little kit like this will add to your arsenal.

Excellent these are good quality. Very good performance safe with the cover on